[Asterisk-Users] SIP registration/dialing problem.

[Ben Greear]

Hello!

I have a Grandstream and a Cisco SIP phone, and I'm trying to make
a call between them.  I added this to my sip.conf:

; Grandstream
[1001]
type=friend
host=dynamic

; cisco phone
[1002]
type=friend
host=dynamic

It appears that they register correct:


grok*CLI> sip show peers
Name/username    Host            Dyn Nat ACL Mask             Port     Status
1002/1002        192.168.1.14     D          255.255.255.255  5060     Unmonitored
1001/1001        192.168.1.23     D          255.255.255.255  5060     Unmonitored
vocal1           (Unspecified)    D          255.255.255.255  0        Unmonitored
grok*CLI>


But, I get a 404 when I try to dial '1002' from my grandstream SIP phone.

I'm using the 1.0 cvs tree on RedHat 9.

I'm new to Asterisk, so this is most likely a configuration error on my part.
Any ideas for how to fix this and/or debug this sort of thing will be appreciated!

Thanks,
Ben

-- 
Ben Greear <greearb at candelatech.com>
Candela Technologies Inc  http://www.candelatech.com