[Asterisk-Users] Tone while ringing another IAX Phone

[Christopher Stephens]

Simple, add ,r to your Dial command.
>From the wiki:
'r: Generate a ringing tone for the calling party, passing no audio from
the called channel(s) until one answers. Use with care and don't insert
this by default into all your dial statements as you are killing call
progress information for the user.'

On Tue, 2 Nov 2004 19:48:06 -0000, "Gunnar Þ. Gestsson"
<gunnar at element.is> said:
> Hello
>  
> I have an IAX Phone installed on two Windows machines.  When dialling from one to the other the user is not supplied with a dialling tone.  I maid Asterisk read a notify to > the user but it is followed by a silence for up to 20 seconds.  Is there a solution for this ?
>  
> Following is my extension for the IAX Phones.
>  
> exten => _45570XX,1,Playback(vm-dialout)
> exten => _45570XX,2,Dial(IAX2/${EXTEN}, 20)
> exten => _45570XX,3,Voicemail(u${EXTEN})
> exten => _45570XX,4,Hangup
> exten => _45570XX,103,Voicemail(b${EXTEN})
> exten => _45570XX,104,Hangup
> 
> Regards, 
> Gunnar Gestsson
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users