[Asterisk-Users] Cannot start asterisk - CAPI issues

[Jean-Michel Hiver]

>It's not enough, you must compile the correct Eicon driver.
>Read /usr/src/linux/Documentation/isdn/README.eicon
>  
>
Okay... Well, since my goal is to get asterisk to somehow work, I have 
removed the card from the box. To my surprise, I still have the same 
error! I have tried re-compiling asterisk but it doesn't do anything 
different afterwards. Do I need to recompile the kernel without CAPI 
support?

>Usually, you also need to load a firmware (with eiconctrl).
>Check out behind your card, when succesfully started, LEDs are turned on.
>  
>
There's no leds on this ISDN card... it's an old Eicon Diva 2.01 S/T 
that I got for 20 euros or so :-)

Cheers,
Jean-Michel.

>For old cards, you may try isdn4linux instead CAPI.
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>