[Asterisk-Users] D-Channel Problems

[Steven Critchfield]

On Mon, 2004-05-31 at 10:16, Eric Wieling wrote:
> On Mon, 2004-05-31 at 09:44, Jeff Sczpel wrote:
> 
> > [/etc/zaptel.conf]
> > span=1,1,1,esf,b8zs
> 
> span=1,0,1,esf,b8zs

I'm writing this because you seem to be getting guesses from people who
aren't telling you it is a guess. 

from /etc/zapata.conf
span=<span num>,<timing>,<line build out (LBO)>,<framing>,<coding>[,yellow]

so you need
span=1,1,0,esf,b8zs

You must take your timing from the line as primary. You don't need to
modify the build out as it isn't going to be more than 133ft from the
smartjack. 

Note that you may have to power cycle the machine to set the timing
properly. Verify timing using zttool. 
-- 
Steven Critchfield <critch at basesys.com>