[Asterisk-Users] Dlink DG-104s telnet reboot

[Zot O'Connor]

On Thu, 2004-05-27 at 12:11, David H Hickman wrote:
> Is there any reference for the dg-104 telnet(shell)

It is the same as the serial port.  Login is same as webserver.

>From the manual.doc

        General Setup Commands 
        nwdbg system reboot
        
        Definition: This command is used to restart the device.
        
        Parameter(s): None.
        
        Example: nwdbg system reboot
        
        
        
        nwdbg save changes
        
        Definition: This command is used to save configuration changes
        into flash and then restart the device.
        
        Parameter(s): None.
        
        Example: nwdbg save changes
        
        
        
        nwdbg factory reset
        
        Definition: This command is used to change all of the
        configuration data to the default values, save the new
        configuration data into flash, and then restart the device.
        
        Parameter(s): None.
        
        Example: nwdbg factory reset
        
        
        
        nwdbg un <USERNAME>
        
        Definition: This command sets the username if there is a
        username string, or shows the username/password if only nwdbg un
        is typed.
        
        Parameter(s): <USERNAME, maximum string length is 12 characters>
        
        Example: nwdbg un 123456789012
        
        
        
        nwdbg pw <PASSWORD>
        
        Definition: This command sets the password if there is a
        password string, or shows the username/password if only nwdbg pw
        is typed.
        
        Parameter(s): <PASSWORD, maximum string length is 12 characters>
        
        Example: 


> 
> I need to log into a remote unit and reboot it over telnet.
> 
> Its shell is not clear.
> 
> 
> David Hickman
> TSG Computer Consulting - Auctions
> 314-865-4752 x2
-- 
Zot O'Connor <zot at zotconsulting.com>
White Knight Hackers, Inc.