[Asterisk-Users] Re: Grandstream v1.0.4.68 firmware

[Stephen R. Besch]

Thomas Gallaway wrote:

> Brian Capouch wrote:
> 
>> Thomas Gallaway wrote:
>>
>>>>
>>>>
>>> My ringtones just work on all the grandstream's :-)
>>
>>
>>
>> Do the "URLS" for the ringtones at the top show up as something other 
>> than all zeroes?
>>
>> I've fiddled with this until blue in the face, and the ring sounds 
>> just like the ring it had before.
>>
>> This is with 1.0.4.68, but it was no different with the earlier 
>> supposedly ringtone enabled version.
>>
> *Product Model: *       BT100
> *Software Version: *       Program--1.0.4.68    Bootloader--1.0.0.16   
> HTML--1.0.0.31    VOC--1.0.0.5
> *Custom Ring Tone: *       ring1--1.0.0.0   ring2--1.0.0.0   ring3--1.0.0.0
>  (all zeroes means unavailable or unsupported)
> 
> 
> -- Thomas
Well in my case, the ring versions are all 0.0.0.0 no matter what I do. 
Could you also post the exact spelling of the binarys on the tftp, 
including capitalization, access rights and access mode. Mine are 
ring1.bin, ring2.bin, ring3.bin, all lower case, owned by root, in the 
asterisk group and with r/w mode=rw_rw_r__ (664), which is the same as 
all the other items on the server, which do in fact get loaded. Also, 
I've checked the binaries and they do in fact have version 1.0.0.0 
embedded in the file (look at hex offset 6, which is where the version 
signature of all the GS bianries is located). I also can connect to the 
tftp server from another machine and successfully "get ring1.bin". 
Perhaps the binaries that came with my copy of the firmware are 
corrupted. Maybe you could zip up the tones you are using and post them 
to me so I could see if these fix the problem.

SRB