[Asterisk-Users] Unable to play dialtone on channel xx (Zaptel TE405P)

[Alejandro Sosa]

Hello,

I'm running * on a very basic configuration. I have a Wildcard TE405P
with the first T1 connected to a PRI line and the remaining three to
Adtran TA750 channel banks with FXS modules.

I successfully configured everything to work with a couple of Swissvoice
IP10S handsets (MGCP) and analog extensions connected to the channel
banks.

The problem I'm having is that when I pick up any of the analog handsets
I get no dial tone. Switching works, I can place and receive calls on
both analog and MGCP handsets. The MGCP phones give me dial tone fine
when I take them off the hook, only the analog ones don't do it.

When I run the console with a lot of verbosity I see a message like:

"Apr 26 21:19:57 WARNING[1200825920]: chan_zap.c:4848 handle_init_event:
Unable to play dialtone on channel 25"

And then, right after I get:

"-- Starting simple switch on 'Zap/25-1' "

...and I'm able to dial normally, but no dial tone whatsoever.

Any ideas???

Thanks in advance.

Alejandro Sosa.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040513/c20e2b70/attachment.htm