[Asterisk-Users] MGCP channel problem

[Dudlik]

Hello

I have a problem with my MGCP voice gateway. 
I use D-Link DG104S
Boot PROM Version 	3.0B38-D
Firmware Version 	3.0T86-D

I tried asterisk v 0.7.2 and I am using latest CVS version now.
When I dial a number very fast, or when I use a redial function, my asterisk receives coupled digits.
My co-worker called number 245005111, these are a few lines of my debug. 

The identifier of first digit (2) is 7152
then asterisk received  second digit (4), identifier 7153
and then asterisk received third digit... (2) with identifier 7152

so, asterisk dialed number 24254......

all debug is in attachment


1 headers, 0 lines
Urgent handler
MGCP read: 
NTFY 7152 aaln/0 at MARV MGCP 1.0 NCS 1.0
N:[217.66.161.5]:2427
X:23f9c13c
O: 2

from 217.66.161.122:2427Verb: 'NTFY', Identifier: '7152', Endpoint: 'aaln/0 at MARV', Version: 'MGCP 1.0'
4 headers, 0 lines
Handling request 'NTFY' on aaln/0 at MARV
Transmitting:
200 7152 OK

 to 217.66.161.122:2427
    -- Endpoint 'aaln/0 at MARV-1' observed '2'
    -- MGCP Asked to indicate tone: ro on  aaln/0 at MARV-1 in cxmode: inactive
Posting Request:
RQNT 8819 aaln/0 at MARV MGCP 1.0
X: 23f9c13c
R: hu(N), hf(N), D/[0-9#*](N)
S: ro
 to 217.66.161.122:2427
Urgent handler
MGCP read: 
NTFY 7153 aaln/0 at MARV MGCP 1.0 NCS 1.0
N:[217.66.161.5]:2427
X:23f9c13c
O: 4

from 217.66.161.122:2427Verb: 'NTFY', Identifier: '7153', Endpoint: 'aaln/0 at MARV', Version: 'MGCP 1.0'
4 headers, 0 lines
Handling request 'NTFY' on aaln/0 at MARV
Transmitting:
200 7153 OK

 to 217.66.161.122:2427
    -- Endpoint 'aaln/0 at MARV-1' observed '4'
    -- MGCP Asked to indicate tone: ro on  aaln/0 at MARV-1 in cxmode: inactive
Posting Request:
RQNT 8820 aaln/0 at MARV MGCP 1.0
X: 23f9c13c
R: hu(N), hf(N), D/[0-9#*](N)
S: ro
 to 217.66.161.122:2427
Urgent handler
MGCP read: 
NTFY 7152 aaln/0 at MARV MGCP 1.0 NCS 1.0
N:[217.66.161.5]:2427
X:23f9c13c
O: 2

from 217.66.161.122:2427Verb: 'NTFY', Identifier: '7152', Endpoint: 'aaln/0 at MARV', Version: 'MGCP 1.0'
4 headers, 0 lines
Handling request 'NTFY' on aaln/0 at MARV
Transmitting:
200 7152 OK

 to 217.66.161.122:2427
    -- Endpoint 'aaln/0 at MARV-1' observed '2'
    -- MGCP Asked to indicate tone: ro on  aaln/0 at MARV-1 in cxmode: inactive
Posting Request:
RQNT 8821 aaln/0 at MARV MGCP 1.0
X: 23f9c13c
R: hu(N), hf(N), D/[0-9#*](N)
S: ro
 to 217.66.161.122:2427
Urgent handler
MGCP read: 
NTFY 7154 aaln/0 at MARV MGCP 1.0 NCS 1.0
N:[217.66.161.5]:2427
X:23f9c13c
O: 5

from 217.66.161.122:2427Verb: 'NTFY', Identifier: '7154', Endpoint: 'aaln/0 at MARV', Version: 'MGCP 1.0'
4 headers, 0 lines
Handling request 'NTFY' on aaln/0 at MARV




This problem is only while my colleague is downloading any data from internet. The voip gateway is on the same internet line as colleague's computer.
I have these problemes everywhere with higher latence.




Can I set digit report on my MGCP gateway to block mode ?
I tried it, but no effect.
I changed xgcp set_digit_report to 1
But it doesn't work :(
My MGCP gateway always reports DTMF in comma separated.


Can you help me please ?

Thank you

Vit Bohacek

-------------- next part --------------
A non-text attachment was scrubbed...
Name: debug.txt
Type: application/octet-stream
Size: 13523 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040513/1bcb5978/debug.obj