[Asterisk-Users] Asterisk <--> Cisco router

[Joseph]

I will double check.

How much cpu does the MeetMe feature need
per user?

Or does it depend on how they connect?

On Mon, 2004-05-03 at 11:54, James Sizemore wrote:
> Check the duplex on your ethernet conection on both the Cisco and the
> Asterisk box.  Make sure neither are half duplex.
> 
> Joseph wrote:
> 
> >What codec should be used to connect a * box to
> >a cisco router which has a t1 with 24 trunks coming in?
> >
> >My router voip dial plan looks like this:
> >
> >dial-peer voice 2 voip
> > destination-pattern [1,2,,3,5,8]..
> > session protocol sipv2
> > session target ipv4:10.x.x.x
> > dtmf-relay cisco-rtp
> > codec g711ulaw
> > no vad
> >!
> >
> >The problem I have is when more than one call is on it,
> >sometimes the quality gets very bad.
> >
> >If more than one access the conference room it starts to 
> >blip real badly. 
> >
> >Thots, ideas greatly appreciated.
> >  
> >
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
respectfully, Joseph
--------------------