[Asterisk-Users] Carrier Access CMG/FXS MGCP to Asterisk, Works Fine

JR Richardson jr.richardson at cox.net
Tue Mar 30 17:01:48 MST 2004


FYI,

 

Follow the Quick Start Guide from Carrier Access to setup the CMG (Customer
Media Gateway) Router card.  Follow the Asterisk mgcp.conf wiki page setup.
The only issue I had was with the CAC CMG card, it defaults to strict policy
message exchange and dial-tone will not come across when you go off-hook on
a FXS port.  To resolve this, get back into the CAC CMG configuration, goto:

-profile directory - router card setup - MGCP Configure - MGCP
Interoperability Settings - (set) Parse Mode: Lenient

 

Either Carrier Access or Asterisk is not completely compatible with the RFC,
but this seems to get the two talking together.

 

Hope this helps.

 

JR

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040331/4ba6bb56/attachment.htm


More information about the asterisk-users mailing list