[Asterisk-Users] G726 not working ?

[Bill Hamel]

Hi,

Thanks for the reply!

I am still having troubles

I did try:

disallow=all
allow=g726

And still get:

Mar 30 15:49:29 WARNING[-1137677392]: chan_sip.c:2128 process_sdp: No
compatible codecs!

-b

Quoting Michael Manousos <manousos at inaccessnetworks.com>:

> Hi,
> 
> Bill Hamel wrote:
> > Hi,
> > 
> > I am running FC1 with latest patches of 3/30/04, and I have the latest CVS
> as of
> > this morning 3/30/04 of asterisk, zap and libpri.
> > 
> > The SIP device I am using is a Sipura SPA-2000 with G726-32 "Forced".
> > 
> > When I 'make clean" and recompiled zaptel, libpri, asterisk and start
> asterisk I
> > can see:
> > 
> > [format_g726.so] [format_g726.so] => (Raw G.726 (16/24/32/40kbps) data)
> >   == Registered file format g726-40, extension(s) g726-40
> >   == Registered file format g726-32, extension(s) g726-32
> >   == Registered file format g726-24, extension(s) g726-24
> >   == Registered file format g726-16, extension(s) g726-16
> 
> This is the support for reading/writing raw G.726 (all rates)
> data from/to files. It is not the G.726 codec. The codec
> is the codec_g726.so module (32 Kbps only).
> 
> > 
> > I 'Ass'ume this indicates that g726 is installed..
> > 
> > So in my sip.conf I put many variations of what I thought should go in
> there,
> > finally includeing (to no avail):
> > 
> > disallow=all
> > allow=g726-40
> > allow=g726-32
> > allow=g726-24
> > allow=g726-16
> > allow=g726
> > allow=ima-adpcm
> 
> You should allow "g726" only.
> 
> > 
> > (Also tried G.726-xx etc... ) And none seem to work because when I dial out
> I
> > get
> > 
> > Mar 30 15:49:29 WARNING[-1137677392]: chan_sip.c:2128 process_sdp: No
> compatible
> > codecs!
> > 
> > I must not be putting the correct "allow=" value in sip.conf or possibly
> missing
> > something. 
> > 
> > Can anyone point me in the right direction ?
> > 
> > Thanks
> > -bh
> > 
> > 
> 
> 
> Michael.



-- 


----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

-- 
This message has been scanned for viruses and
dangerous content by the Bugs.Hamel.Net MailScanner, 
and appears to be clean.