[Asterisk-Users] TE410P to E100P for stress test
Scott Stingel
scott at evtmedia.com
Fri Mar 26 15:05:39 MST 2004
Hi Dimitri-
I'm not sure, but it looks like you have too many clock sources.
Assuming that the Sonata can serve as a clock source:
Try this in zaptel.conf, (zapata.conf info is shown too)
BOX 1: (with the TE410P)
Span 1 (connected to the sonata): span=1,0,0,ccs,hdb3,crc4,yellow (and
pri_cpe)
Span 2 (connected to BOX 2): span=1,1,0,ccs,hdb3,crc4,yellow (and
pri_net)
BOX 2: (with the E100P)
Span 1 (connected to BOX 1): span=1,0,0,ccs,hdb3,crc4,yellow (and
pri_cpe)
Note above that Box 1, span 2 is the only span to source a clock, and the
only pri_net.
When you use the crossover cable to connect Box 1 and Box 2, you should get
green lights on the TE410P and E400P for those spans.
If this doesn't work, try removing "yellow" from each line.
Regards
Scott
Scott M. Stingel
Emerging Voice Technology Inc.
Palo Alto, California and London, England
Email: scott "at" evtmedia.com
URL: www.evtmedia.com
>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of reseaux
>Sent: Thursday, March 25, 2004 8:52 PM
>To: asterisk-users at lists.digium.com
>Subject: Re: [Asterisk-Users] TE410P to E100P for stress test
>
>Dear Scott
> i have made every possible combination from timing
>source to cvs version is
>possible but nothing i speack a lot in chat with nice guy about it but
>nothing... the cable is not the problem im sure of it because
>i use Trend
>Aurora Sonata Tester (..but im not good telecom guru...im
>geek:-) ) and if
>use it to performe more test about cable and connection/timing..
>So My problem is connect this type of object:
>- PBX with one PRI (1 span)
>- Box1 with 1 TE100P zaptel/libPRI latest cvs
>- Box1 with 1 E100P zaptel/libPRI latest cvs
>- Test System Sonata (1 Span)
>Now i want test * to obtain a LOAD TEST..
>1-Timing from Sonata Network/Master
>2-Span1 (span=1,1,0,ccs,hdb3,crc4,yellow) Box1 "signalling = pri_cpe"
>3-Span2 (span=2,1,0,ccs,hdb3,crc4,yellow) Box1 "signalling = pri_cpe"
> also try (span=2,2,0,ccs,hdb3,crc4,yellow) Box1
> also try (span=2,0,0,ccs,hdb3,crc4,yellow) Box1
>4-Span1 (span=1,1,0,ccs,hdb3,crc4,yellow) Box2 "signalling = pri_net"
>
> Passtrough call
> check destination
>SONATA--------->Span1 TE410P Box1 Queue the call
> Span2 TE410P Box1-------->E100P Span1 Box2
>
>This configure not work !!! About Sync, seems fail sync after
>10-30 sec with
>Span2 Box1 --->Span1 E100P Box2 , the first time when i
>restart Box1 the
>syncing and i can call to Box2 well and works well but after
>some second drop
>with this message:
>Mar 22 20:30:09 WARNING[196621]: chan_zap.c:5972 zt_pri_error:
>PRI: Read on 77
>failed: Unknown error 500
>Mar 22 20:30:09 NOTICE[196621]: chan_zap.c:6687 pri_dchannel:
>PRI got event: 4
>on span 2
>Mar 22 20:30:09 WARNING[213006]: chan_zap.c:4909
>handle_init_event: Detected
>alarm on channel 32: Yellow Alarm
>Mar 22 20:30:09 WARNING[213006]: chan_zap.c:4909
>handle_init_event: Detected
>alarm on channel 33: Yellow Alarm
>Mar 22 20:30:09 WARNING[213006]: chan_zap.c:4909
>handle_init_event: Detected
>alarm on channel 34: Yellow Alarm
>-------------------------------
>
>So after long test and coffee :-) i can only say that seems *
>dont manage the
>Network Conf is right? How is possible solution?
>Thanks in advance
>Dimitri
>
>On Thursday 25 March 2004 18:42, Scott Stingel wrote:
>> Looks like you have to have one side of the direct
>connection supply a
>> clock source. Try having box 2 source the clock on that span:
>>
>> span=1,1,0,ccs,hdb3,crc4,yellow
>>
>> Also, I've never used the Yellow option, so I don't know how
>that effects
>> things.
>>
>> But anyway, I've done exactly what you want to do, stress
>test from one
>> system to the other. Should be no problem..
>>
>> Regards
>>
>> Scott M. Stingel
>> Emerging Voice Technology Inc.
>> Palo Alto, California and London, England
>>
>> Email: scott at evtmedia.com
>> URL: www.evtmedia.com
>>
>>
>>
>> -----Original Message-----
>> From: asterisk-users-admin at lists.digium.com
>> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of reseaux
>> Sent: Wednesday, March 24, 2004 6:44 PM
>> To: asterisk-users at lists.digium.com
>> Subject: [Asterisk-Users] TE410P to E100P for stress test
>>
>>
>> Dear
>> i have two box and i want made some stress test with
>one TE410P and
>> a E100P
>> with only one span 1
>> Server
>> TE410P
>> Span 1<------ PBX
>> Span 2------->E100P Box
>>
>> The Box with TE410P is Mandrake 9.2 with P4 HT
>> #zaptel.conf
>> span=1,0,0,ccs,hdb3,crc4,yellow
>> span=2,0,0,ccs,hdb3,crc4,yellow
>> span=3,0,0,ccs,hdb3,crc4,yellow
>> span=4,0,0,ccs,hdb3,crc4,yellow
>>
>> bchan=1-15,17-31
>> dchan=16
>> bchan=32-46,48-62
>> dchan=47
>> bchan=63-77,79-93
>> dchan=78
>> bchan=94-108,110-124
>> dchan=109
>>
>> #zapata.conf
>> group = 1
>> switchtype = euroisdn
>> ;signalling = pri_net
>> signalling = pri_cpe
>> context=prepaid
>> immediate=no
>> callerid=asreceived
>> channel => 1-15,17-31,63-77,79-93 ; ,125-139,141-155,187-201,203-217
>>
>> group = 2
>> switchtype = euroisdn
>> ;signalling = pri_cpe
>> ;signalling = pri_net
>> context=demo
>> ;immediate=yes
>> channel => 32-46,48-62,94-108,110-124 ;
>,156-170,172-186,218-232,234-248
>>
>> The second Box E100P Mandrake 9.2 P3 800Mhz
>> #zaptel.conf
>> /// Add PRI T100P
>> span=1,0,0,ccs,hdb3,crc4,yellow
>> bchan=1-15,17-31
>> dchan=16
>>
>> #zapata.conf
>> group = 1
>> switchtype = euroisdn
>> ;signalling = pri_net
>> signalling = pri_net
>> context=incoming
>> immediate=yes
>> callerid=asreceived
>> ;echocancel=32 ;or yes
>> ;echocancelwhenbridged=yes
>> channel => 1-15,17-31
>>
>> The two box works great with my lucent pbx but when i
>connect the two box
>> the
>> span i have the following error:
>> --
>> Mar 25 02:41:15 NOTICE[262161]: chan_zap.c:4881
>handle_init_event: Alarm
>> cleared on channel 29
>> --
>> Mar 25 02:41:15 NOTICE[262161]: chan_zap.c:4881
>handle_init_event: Alarm
>> cleared on channel 29
>> --
>>
>> And want sync the span...
>> Only some time the span is syncronized and i made a one call
>and works but
>> only for one or two call..
>> Someone can give me some hits...
>> Thanks in advance
>> Dimitri
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
More information about the asterisk-users
mailing list