[Asterisk-Users] Adtran TA750, any chance of working MWI ?

[Wade J. Weppler]

Make sure that Onhook Messaging is enabled on the Adtran FXS ports.  I'd
also suggest upgrading to the latest 750 firmware (L36) as it fixes some
specific MWI issues.

-wade

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steve Creel
Sent: Friday, March 26, 2004 1:33 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Adtran TA750, any chance of working MWI ?

I have a bunch of existing AT&T/Lucent/Avaya 2500YMGP sets with LED
message waiting lights.  Do I stand any chance of getting the Adtrans to
light these?

What I know so far:

When you pick up the telephone, the LED flashes.
If you plug two telephones in, picking up one flashes the LED on the
other.
Hanging the telephone up will flash the LED.
Incoming calls flash the LED.
Stutter dialtone is there and functioning.
Debugs in chan_zap reveal that do_monitor sees there are messages, and
tries to update MWI status.
The Adtran is putting out 50 volts when on hook (either with or without
a
message waiting).  If 'On Hook Messaging' is enabled (I think this is
for
ADSI ?), the voltage is closer to 40v.

I'm at a loss as to what to do, could anyone offer some pointers?

Many thanks,
Steve
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users