[Asterisk-Users] seperating zap

[Sean Cheesman]

Make sure that the context specified in the zapata.conf section for
ZAP/1 actually exists in your extensions.conf and isn't blank.  I had
the same problem with two X100P's in my system a few weeks ago.  Hope
this helps...

Sean

-----Original Message-----
From: Chris Clifton [mailto:chris at netlabz.com] 
Sent: Wednesday, March 24, 2004 10:31 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] seperating zap



Trying to seperate fxo (pstn) lines such that :

zap/1 is used only for outgoing calls
zap/2 is not used for outgoing calls
zap/1 should NOT answer to the ivr menu when an inbound call comes in.
zap/2 should answer to the ivr menu when an inbound call somes in

I've tried all sorts of variations in extensions.conf, but asterisk
still picks up incoming calls on zap/1 ...

Thanks,
Chris

---------------------
beginning of extensions.conf
---------------------
[incoming]

exten => s,1,Answer
exten => s,2,DigitTimeout(5)           ; Set Digit Timeout to 10 seconds
exten => s,3,ResponseTimeout(15)        ; Set Response Timeout to 20
seconds
exten => s,4,Background(/tmp/intro)     ; Ask them for the extension
they
want


---------------------
zapata.conf
---------------------
[channels]


group=1
echotraining=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=5.0
txgain=-2.0
language=en
context=default
signalling=fxs_ls
usecallerid=yes
channel => 1


group=2
echotraining=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0
txgain=-0
language=en
context=incoming
signalling=fxs_ls
usecallerid=yes
channel => 2

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users