[Asterisk-Users] PRI issues with TE410P
tan at yointernet.com
tan at yointernet.com
Wed Mar 24 05:02:36 MST 2004
Before going to gentoo or another version of linux, try the following:
1) turn hyperthreading off in the BIOS. It's probably called something
like "virtual cpus".
2) Use a vanilla kernel from kernel.org e.g. 2.4.25.
We used to have times when the system would just hang. Using a
non-redhat kernel seems to have resolved that. We also use Gentoo, but I
warn you that it is not the easiest flavour to set up!
Hope that helps.
Tan
Telappliant.com
Voiptalk.org
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Azher Amin
Sent: 24 March 2004 08:49
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] PRI issues with TE410P
Dear,
Are you using Redhat9.0, coz I discussed about this yesterday with mike
in Digium, and he said that this is normal with Redhat (due to its SMP
handling problems), further he suggested to shift either to redhat 8 or
debian. You can try debian or gentoo.
I will try gentoo tomorrow and will see this behavior again.
Regards
Azher
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of reseaux
Sent: Wednesday, March 24, 2004 2:32 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] PRI issues with TE410P
Dear
i have found the same problem last sunday in my * box and freeze
itself. My Box is Pentium 4 HT with 2 CPU and i see it in
/proc/interrupts
-----------------
CPU0 CPU1 CPU2 CPU3
0: 13088533 0 0 0 IO-APIC-edge timer
1: 6 0 0 0 IO-APIC-edge
keyboard
2: 0 0 0 0 XT-PIC
cascade
8: 1 0 0 0 IO-APIC-edge rtc
12: 12 0 0 0 IO-APIC-edge PS/2
Mouse
14: 2146897 0 1 0 IO-APIC-edge ide0
15: 118 0 1 0 IO-APIC-edge ide1
16: 0 0 0 0 IO-APIC-level
usb-uhci
18: 0 0 0 0 IO-APIC-level
usb-uhci
19: 0 0 0 0 IO-APIC-level
usb-uhci
28: 118357 0 0 0 IO-APIC-level eth0
48: 130880536 0 0 0 IO-APIC-level t4xxp
NMI: 0 0 0 0
LOC: 13088959 13088958 13088958 13088958
ERR: 0
MIS: 0
--------------------------------------------------------
What we think about?
Thanks in advance
Dimitri
On Sunday 21 March 2004 15:40, Azher Amin wrote:
> Hi,
>
> I am having some problems mentioned below, the box is in production
live
> environment with traffic around 30 - 100 calls.
>
> I am running T/E410P in a Dual P4 xeon with HT disabled. I am using
> zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just
mysql,
> perl (small script) and asterisk.
>
> System runs very smoothly if the calls are around 40-50 and comes one
by
> one , however sometimes at immediate load of around 30 more calls ...
I
> get the following processes in the ps -ax, and asterisk starts droping
> the calls, irq misses rise and console shows lot of pri errors (which
> donot occur in a smooth load of around 50 calls).
>
> Can someone explain why this happens .. however these get cleared once
> the channels are handled.
>
> 20992 pts/3 S 0:01 zttool
> 21412 ? S 0:00 asterisk
> 21413 ? R 0:00 asterisk
> 21418 ? S 0:00 asterisk
> 21419 ? S 0:00 asterisk
> 21420 ? S 0:00 asterisk
> 21421 ? S 0:00 asterisk
> 21422 ? S 0:00 asterisk
> 21423 ? S 0:00 asterisk
> 21424 ? S 0:00 asterisk
> 21425 ? S 0:00 asterisk
> 21426 ? S 0:00 asterisk
> 21427 ? S 0:00 asterisk
> 21429 ? S 0:00 asterisk
> 21430 ? S 0:00 asterisk
> 21431 ? S 0:00 asterisk
> 21432 ? S 0:00 asterisk
> 21433 ? S 0:00 asterisk
> 21434 ? S 0:00 asterisk
> 21435 ? S 0:00 asterisk
> 21436 ? S 0:00 asterisk
> 21437 ? S 0:00 asterisk
> 21438 ? S 0:00 asterisk
> 21439 ? S 0:00 asterisk
> 21440 ? S 0:00 asterisk
> 21441 ? S 0:00 asterisk
> 21442 ? S 0:00 asterisk
> 21443 ? S 0:00 asterisk
> 21444 ? S 0:00 asterisk
> 21445 ? S 0:00 asterisk
> 21446 ? S 0:00 asterisk
> 21447 ? S 0:00 asterisk
> 21448 ? S 0:00 asterisk
> 21449 ? S 0:00 asterisk
> 21451 ? S 0:00 asterisk
> 21452 ? S 0:00 asterisk
> 21453 ? S 0:00 asterisk
> 21454 ? S 0:00 asterisk
> 21455 ? S 0:00 asterisk
> 21456 ? S 0:00 asterisk
> 21457 ? S 0:00 asterisk
> 21458 ? S 0:00 asterisk
> 21459 pts/2 R 0:00 ps -ax
> 21460 ? S 0:00 asterisk
>
>
>
> Further I am also getting
>
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2 Mar 22 01:33:09 WARNING[114696]:
> chan_zap.c:5970 zt_pri_error: PRI: !! Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got S-frame while link down
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got S-frame while link down
> == D-Channel on span 1 up
>
> and certain IRQ misses like around 270 after an operation of 2-3
hours.
>
> Further when I load the T/E410p card I get this error ...
>
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Launching card: 0 Mar 22
> 00:33:48 VoiceOne kernel: TE410P: Setting up global serial parameters
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Timing from source 0
> Mar 22 00:33:48 VoiceOne kernel: Found a Wildcard: Wildcard
> TE410P-Xilinx
> Mar 22 00:33:48 VoiceOne kernel: Registered tone zone 0 (United States
/
> North America)
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 1 configured for
> CCS/HDB3/CRC4 Mar 22 00:33:48 VoiceOne kernel: SPAN 1: Primary Sync
> Source Mar 22 00:33:48 VoiceOne kernel: Uhhuh. NMI received for
> unknown
reason
> 20.
> Mar 22 00:33:48 VoiceOne kernel: Dazed and confused, but trying to
> continue Mar 22 00:33:48 VoiceOne kernel: Do you have a strange power
> saving
mode
> enabled?
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 2 configured for
> CCS/HDB3/CRC4 Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 3
> configured for CCS/HDB3/CRC4
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 4 configured for
> CCS/HDB3/CRC4
>
> I have another card and above also come with that.
>
> I look forward for resolution on these issues with some suggestions to
> improve the stability. Coz otherwise system is not stable to be sold
to
> client.
>
> Regards
> Azher Amin
> -------------------------------
> http://www.consulttech.com.pk
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list