[Asterisk-Users] PRI issues with TE410P

reseaux reseauxit at yahoo.it
Tue Mar 23 14:32:08 MST 2004


Dear 
	i have found the same problem last sunday in my * box and freeze itself.
My Box is Pentium 4 HT with 2 CPU and i see it in /proc/interrupts
-----------------
          CPU0       CPU1       CPU2       CPU3
  0:   13088533          0          0          0    IO-APIC-edge  timer
  1:          6          0          0          0    IO-APIC-edge  keyboard
  2:          0          0          0          0          XT-PIC  cascade
  8:          1          0          0          0    IO-APIC-edge  rtc
 12:         12          0          0          0    IO-APIC-edge  PS/2 Mouse
 14:    2146897          0          1          0    IO-APIC-edge  ide0
 15:        118          0          1          0    IO-APIC-edge  ide1
 16:          0          0          0          0   IO-APIC-level  usb-uhci
 18:          0          0          0          0   IO-APIC-level  usb-uhci
 19:          0          0          0          0   IO-APIC-level  usb-uhci
 28:     118357          0          0          0   IO-APIC-level  eth0
 48:  130880536          0          0          0   IO-APIC-level  t4xxp
NMI:          0          0          0          0
LOC:   13088959   13088958   13088958   13088958
ERR:          0
MIS:          0
--------------------------------------------------------
What we think about?
Thanks in advance
Dimitri
On Sunday 21 March 2004 15:40, Azher Amin wrote:
> Hi,
>
> I am having some problems mentioned below, the box is in production live
> environment with traffic around 30 - 100 calls.
>
> I am running T/E410P in a Dual P4 xeon with HT disabled. I am using
> zaptel 0.9.0 and asterisk stable 1 release. There is no gui, just mysql,
> perl (small script) and asterisk.
>
> System runs very smoothly if the calls are around 40-50 and comes one by
> one , however sometimes at immediate load of around 30 more calls ... I
> get the following processes in the ps -ax, and asterisk starts droping
> the calls, irq misses rise and console shows lot of pri errors (which
> donot occur in a smooth load of around 50 calls).
>
> Can someone explain why this happens .. however these get cleared once
> the channels are handled.
>
> 20992 pts/3    S      0:01 zttool
> 21412 ?        S      0:00 asterisk
> 21413 ?        R      0:00 asterisk
> 21418 ?        S      0:00 asterisk
> 21419 ?        S      0:00 asterisk
> 21420 ?        S      0:00 asterisk
> 21421 ?        S      0:00 asterisk
> 21422 ?        S      0:00 asterisk
> 21423 ?        S      0:00 asterisk
> 21424 ?        S      0:00 asterisk
> 21425 ?        S      0:00 asterisk
> 21426 ?        S      0:00 asterisk
> 21427 ?        S      0:00 asterisk
> 21429 ?        S      0:00 asterisk
> 21430 ?        S      0:00 asterisk
> 21431 ?        S      0:00 asterisk
> 21432 ?        S      0:00 asterisk
> 21433 ?        S      0:00 asterisk
> 21434 ?        S      0:00 asterisk
> 21435 ?        S      0:00 asterisk
> 21436 ?        S      0:00 asterisk
> 21437 ?        S      0:00 asterisk
> 21438 ?        S      0:00 asterisk
> 21439 ?        S      0:00 asterisk
> 21440 ?        S      0:00 asterisk
> 21441 ?        S      0:00 asterisk
> 21442 ?        S      0:00 asterisk
> 21443 ?        S      0:00 asterisk
> 21444 ?        S      0:00 asterisk
> 21445 ?        S      0:00 asterisk
> 21446 ?        S      0:00 asterisk
> 21447 ?        S      0:00 asterisk
> 21448 ?        S      0:00 asterisk
> 21449 ?        S      0:00 asterisk
> 21451 ?        S      0:00 asterisk
> 21452 ?        S      0:00 asterisk
> 21453 ?        S      0:00 asterisk
> 21454 ?        S      0:00 asterisk
> 21455 ?        S      0:00 asterisk
> 21456 ?        S      0:00 asterisk
> 21457 ?        S      0:00 asterisk
> 21458 ?        S      0:00 asterisk
> 21459 pts/2    R      0:00 ps -ax
> 21460 ?        S      0:00 asterisk
>
>
>
> Further I am also getting
>
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got I-frame while link state 2
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got S-frame while link down
> Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
> Got S-frame while link down
>   == D-Channel on span 1 up
>
> and certain IRQ misses like around 270 after an operation of 2-3 hours.
>
> Further when I load the T/E410p card I get this error ...
>
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Launching card: 0
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Setting up global serial
> parameters
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Timing from source 0
> Mar 22 00:33:48 VoiceOne kernel: Found a Wildcard: Wildcard
> TE410P-Xilinx
> Mar 22 00:33:48 VoiceOne kernel: Registered tone zone 0 (United States /
> North America)
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 1 configured for
> CCS/HDB3/CRC4
> Mar 22 00:33:48 VoiceOne kernel: SPAN 1: Primary Sync Source
> Mar 22 00:33:48 VoiceOne kernel: Uhhuh. NMI received for unknown reason
> 20.
> Mar 22 00:33:48 VoiceOne kernel: Dazed and confused, but trying to
> continue
> Mar 22 00:33:48 VoiceOne kernel: Do you have a strange power saving mode
> enabled?
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 2 configured for
> CCS/HDB3/CRC4
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 3 configured for
> CCS/HDB3/CRC4
> Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 4 configured for
> CCS/HDB3/CRC4
>
> I have another card and above also come with that.
>
> I look forward for resolution on these issues with some suggestions to
> improve the stability. Coz otherwise system is not stable to be sold to
> client.
>
> Regards
> Azher Amin
> -------------------------------
> http://www.consulttech.com.pk
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list