[Asterisk-Users] Call waiting

[Ed Rubright]

If you are trying to do this with a SIP phone...it might not work.  I'm not
sure, but I think the hook-flash *0 is zap specific.

Ed 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Simon Brown
Sent: Tuesday, March 23, 2004 2:36 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Call waiting

How do you do a hook-flash?  If I quickly press the hangup button (like you
do on a PSTN phone) it hangs up the whole call.

Simon 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Brian R. Swan
Sent: Wednesday, 24 March 2004 3:45
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Call waiting

I'm having the same problem.  I'm using a SIP phone (not sure if that
matters or not).  I tried doing a hook-flash, then dialing *0, and I just
get a reorder message.  I have threewaycalling=yes in my zapata.conf.

I actually gave up a few weeks ago looking for the answer to this, but it
appears that other people are having the same problem.  Can this be done
with a SIP phone?

Swannie

On Tuesday 23 March 2004 8:14 am, Ed Rubright wrote:
> You need to hook-flash first...then dial *0.
>
> Ed
>
>   _____
>
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Simon 
> Brown
> Sent: Tuesday, March 23, 2004 5:20 AM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Call waiting
>
>
> I have "threewaycalling=yes" in my zapata.conf file.
> When I hear the call waiting indicator I dial *0# on the phone, but it 
> is ignored.
>
> How can I get it to work?
>
> Simon
>
>   _____
>
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Ed 
> Rubright
> Sent: Tuesday, 23 March 2004 14:46
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] Call waiting
>
>
> You need to send a hook flash to the PSTN line attached to the X100P.  
> This is done by:
>
> hook-flash then *0
>
> You'll need to have 3way calling enabled for it to work.
>
> NOTE:  This info can be found in the wiki pages:
> http://www.voip-ino.org/wiki-Asterisk
>
> Ed
>
>   _____
>
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Simon 
> Brown
> Sent: Monday, March 22, 2004 7:28 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Call waiting
>
>
> I have a problem with call waiting which I cannot find an answer for 
> in any of the information that I have searched through online.  I 
> cannot find anything in the list archives either.
>
> My * server is connected to a PSTN line with an X100P.  I have a call 
> waiting service on this PSTN line which requires a hook flash signal 
> to swap calls.
>
> I have Cisco 7940 phones working with my * server.  When on an outside 
> call and another outside call comes in, I can hear the call waiting 
> indicator, but cannot find any way of swapping calls (sending a hook 
> flash signal through the X100P).
>
> Any help would be greatly appreciated.
>
> Simon Brown
> -----
> This mail was content checked for malicious code and viruses by GFI 
> MailSecurity.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



-----
This mail was content checked for malicious code and viruses by GFI
MailSecurity.

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users