[Asterisk-Users] Use of Alert_Info with C7960?

[Lee Cremeans]

I opened a case with TAC about this, since we tried using the Alert-Info
header here and it made our 7940s and 7960 use the default "Chirp 1" tone
for everything, at least when one of the Bellcore cadences is selected.
Cisco says a new version of the firmware will be out in May, and that this
bug should be looked at by then; I don't know if any extra functionality
will be added. The bug number is CSCec42938 if you want a look.

-lee

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Christopher
Lee
Sent: Saturday, March 20, 2004 9:04 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960?


The custom ring tones are selectable through the Ring Type option in the
Settings menu. When the phone rings, it will play that custom ring tone.

Perhaps it's a memory limitation or an issue with the way Cisco are
implementing the SIP firmware as to why you can't select a custom ring tone,
you'd be better asking a Cisco engineer (open a TAC case)

The phone will only download the currently selected custom ring tone
(defined in RINGLIST.DAT) from the TFTP server each time it boots, or when
you select another custom ring tone from the Ring Type option.

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Matthew Marlowe
> Sent: Sunday, 21 March 2004 11:53 AM
> To: Asterisk Users
> Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960?
>
> Then what's the point of being able to upload custom ring tones?
>
> (as shown in
> http://www.loligo.com/asterisk/Cisco/79xx/current/RINGLIST.DAT )
>
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
> > Christopher Lee
> > Sent: Saturday, March 20, 2004 8:50 PM
> > To: Asterisk Users
> > Subject: RE: [Asterisk-Users] Use of Alert_Info with C7960?
> >
> > Unfortunately even though it would seem the phone should
> > support the ability to play custom ring tones, at present it
> > only supports the internal tones which are:-
> >
> > Bellcore-BusyVerify
> > Bellcore-Stutter
> > Bellcore-MsgWaiting
> > Bellcore-dr1
> > Bellcore-dr2
> > Bellcore-dr3
> > Bellcore-dr4
> > Bellcore-dr5
> >
> > --- Extract from the SIP 6.0 Firmware Release Notes ---
> > http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon
> > /english/ipp79
> > 60/addprot/sip/relnote/phnrn60s.htm
> >
> > In RFC-3261, the Alert-Info header is specified as a URL.
> > When the Alert-Info header is received, the phone downloads
> > the file from the URL and plays it as the alternate ring
> > tone. This release does not support any external ringers.
> > Only the tones and ring patterns that are already internal to
> > the phone can be selected and played as an alternate ring tone.
> >
> > In this release, the Alert-Info header consists of a name of
> > an internal tone or ringing pattern that can be played, as
> > shown in the following
> > example:
> >
> > Alert-Info: <Bellcore-Busy>
> >
> > There is no need to add a file extension (.au, .wav) to these
> > names because the names are internal to the phone. When an
> > Alert-Info header is received, the software scans the list of
> > known tones and ringing patterns to find a match. If the
> > software finds a match, the phone plays that tone or ringing
> > pattern. If the software does not find a match, the phone
> > plays the alert ringing pattern as it does today.
> >
> > > -----Original Message-----
> > > From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> > > admin at lists.digium.com] On Behalf Of Rich Adamson
> > > Sent: Sunday, 21 March 2004 9:28 AM
> > > To: Asterisk-a-users-list
> > > Subject: [Asterisk-Users] Use of Alert_Info with C7960?
> > >
> > > Using Asterisk CVS-03/20/04-11:54:56 with 7960 v6.2 and
> > playing around
> > > with distinctive ringing, trying to make it work. Extensions.conf
> > > looks
> > > like:
> > >
> > > exten => 3010,1,SetVar(ALERT_INFO=3) ; selects Ringer exten =>
> > > 3010,2,Dial(SIP/3010,15) exten => 3010,3,Voicemail2(u3010) exten =>
> > > 3010,102,Voicemail2(b3010) exten => 3010,103,Hangup
> > >
> > > Calling that extension, the CLI indicates:
> > >     -- Executing SetVar("SIP/3002-39d1", "ALERT_INFO=3") in
> > new stack
> > >     -- Executing Dial("SIP/3002-39d1", "SIP/3010|15") in new stack
> > >     -- Called 3010
> > >     -- SIP/3010-f848 is ringing
> > >
> > > On the phone, Settings/Ring Type indicates: Chirp 1, Chirp 2, Old
> > > Style and Synth Low. The first three choices produce
> > different ringing
> > > sounds when selected from the display.
> > >
> > > I expected Alert_Info=3 to cause the C7960 to ring with the
> > Old Style
> > > ringer, but it doesn't and setting it to 2 or 3 doesn't make any
> > > difference.
> > >
> > > Am I doing something wrong?
> > >
> > > Rich
> > >
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users