[Asterisk-Users] Two AVM Fritz Card (hack does not work) what I am doing wrong?

[Thomas Niesel]

Hallo Jakob Strebel
On Mon, 22 Mar 2004 18:27:44 +0100 you wrote:

> Hi,
> I tried to install the following hack.
> http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO
> But the 2nd AVM Fritz PCI card is still not showing up.
> 
> My environment is:
> debian 2.4.24
> (asterisk 0.72)
> 
> Just a quick explanation what I did:
> - edited the filed as described above
> - make clean
> - make
> - make install
> - reboot my machine
> - modprobe capi
> - insmod -f fcpci
> 
> What do I miss? What did I do wrong?
> 
> regards jakob
> 
> ********************************************************************
> asterisk:~# lsmod
> Module                  Size  Used by    Tainted: PF
> fcpci                 532320   2
^^^^^^^OK 1 card found
> capi                    6528   4
> kernelcapi             30624   3  [fcpci capi]
> capiutil               22912   0  [kernelcapi]
> asterisk:~#
> 
> 
> asterisk:/var/log# capiinit start
> modprobe: Can't locate module capifs
> modprobe: Can't locate module capifs
> WARNING: filesystem capifs not available
> modprobe: Can't locate module f2pci
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^No module for the second one
> ERROR: failed to load driver f2pci
> asterisk:/var/log#
> 
...cut

Looks like you did not all the steps!
Don't edit the source, you have to edit the binary file!
Read and do it once again like the README says.

-- 
Tho/\/\as