[Asterisk-Users] PRI issues with TE410P
Scott Stingel
scott at evtmedia.com
Sun Mar 21 09:16:12 MST 2004
Hello Azher-
I have a similar setup in hardware, ie: TE410P running on dual-xeon system,
however I'm running IVR only. I start getting the I-frame errors above
about 80 simultaneous calls. I do not get IRQ misses at all. Also I do not
get the startup error messages. The errors I get the most under load are
the frame retransmission messages in /var/log/asterisk/messages. Do you get
those as well?
Since you are getting IRQ misses, you may have some basic problem, ie:
something keeping the zaptel driver from getting around to servicing the
TE410 interrupts. I think that they have to be serviced without fail every
1 msec, or errors start occurring.
Which kernel are you running?
What does your Perl script do?
Did you try disabling mysql logging to lower the disk load? Maybe the disk
driver is interfering with the zaptel driver interrupts.
Regards
Scott
Scott M. Stingel
Emerging Voice Technology Inc.
Palo Alto, California and London, England
Email: scott "at " evtmedia.com
URL: www.evtmedia.com
>-----Original Message-----
>From: asterisk-users-admin at lists.digium.com
>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Azher Amin
>Sent: Sunday, March 21, 2004 3:41 PM
>To: asterisk-users at lists.digium.com
>Subject: [Asterisk-Users] PRI issues with TE410P
>
>Hi,
>
>I am having some problems mentioned below, the box is in
>production live
>environment with traffic around 30 - 100 calls.
>
>I am running T/E410P in a Dual P4 xeon with HT disabled. I am using
>zaptel 0.9.0 and asterisk stable 1 release. There is no gui,
>just mysql,
>perl (small script) and asterisk.
>
>System runs very smoothly if the calls are around 40-50 and
>comes one by
>one , however sometimes at immediate load of around 30 more calls ... I
>get the following processes in the ps -ax, and asterisk starts droping
>the calls, irq misses rise and console shows lot of pri errors (which
>donot occur in a smooth load of around 50 calls).
>
>Can someone explain why this happens .. however these get cleared once
>the channels are handled.
>
>20992 pts/3 S 0:01 zttool
>21412 ? S 0:00 asterisk
>21413 ? R 0:00 asterisk
>21418 ? S 0:00 asterisk
>21419 ? S 0:00 asterisk
>21420 ? S 0:00 asterisk
>21421 ? S 0:00 asterisk
>21422 ? S 0:00 asterisk
>21423 ? S 0:00 asterisk
>21424 ? S 0:00 asterisk
>21425 ? S 0:00 asterisk
>21426 ? S 0:00 asterisk
>21427 ? S 0:00 asterisk
>21429 ? S 0:00 asterisk
>21430 ? S 0:00 asterisk
>21431 ? S 0:00 asterisk
>21432 ? S 0:00 asterisk
>21433 ? S 0:00 asterisk
>21434 ? S 0:00 asterisk
>21435 ? S 0:00 asterisk
>21436 ? S 0:00 asterisk
>21437 ? S 0:00 asterisk
>21438 ? S 0:00 asterisk
>21439 ? S 0:00 asterisk
>21440 ? S 0:00 asterisk
>21441 ? S 0:00 asterisk
>21442 ? S 0:00 asterisk
>21443 ? S 0:00 asterisk
>21444 ? S 0:00 asterisk
>21445 ? S 0:00 asterisk
>21446 ? S 0:00 asterisk
>21447 ? S 0:00 asterisk
>21448 ? S 0:00 asterisk
>21449 ? S 0:00 asterisk
>21451 ? S 0:00 asterisk
>21452 ? S 0:00 asterisk
>21453 ? S 0:00 asterisk
>21454 ? S 0:00 asterisk
>21455 ? S 0:00 asterisk
>21456 ? S 0:00 asterisk
>21457 ? S 0:00 asterisk
>21458 ? S 0:00 asterisk
>21459 pts/2 R 0:00 ps -ax
>21460 ? S 0:00 asterisk
>
>
>
>Further I am also getting
>
>Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
>Got I-frame while link state 2
>Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
>Got I-frame while link state 2
>Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
>Got I-frame while link state 2
>Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
>Got I-frame while link state 2
>Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
>Got I-frame while link state 2
>Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
>Got S-frame while link down
>Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !!
>Got S-frame while link down
> == D-Channel on span 1 up
>
>and certain IRQ misses like around 270 after an operation of 2-3 hours.
>
>Further when I load the T/E410p card I get this error ...
>
>Mar 22 00:33:48 VoiceOne kernel: TE410P: Launching card: 0
>Mar 22 00:33:48 VoiceOne kernel: TE410P: Setting up global serial
>parameters
>Mar 22 00:33:48 VoiceOne kernel: TE410P: Timing from source 0
>Mar 22 00:33:48 VoiceOne kernel: Found a Wildcard: Wildcard
>TE410P-Xilinx
>Mar 22 00:33:48 VoiceOne kernel: Registered tone zone 0
>(United States /
>North America)
>Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 1 configured for
>CCS/HDB3/CRC4
>Mar 22 00:33:48 VoiceOne kernel: SPAN 1: Primary Sync Source
>Mar 22 00:33:48 VoiceOne kernel: Uhhuh. NMI received for unknown reason
>20.
>Mar 22 00:33:48 VoiceOne kernel: Dazed and confused, but trying to
>continue
>Mar 22 00:33:48 VoiceOne kernel: Do you have a strange power
>saving mode
>enabled?
>Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 2 configured for
>CCS/HDB3/CRC4
>Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 3 configured for
>CCS/HDB3/CRC4
>Mar 22 00:33:48 VoiceOne kernel: TE410P: Span 4 configured for
>CCS/HDB3/CRC4
>
>I have another card and above also come with that.
>
>I look forward for resolution on these issues with some suggestions to
>improve the stability. Coz otherwise system is not stable to be sold to
>client.
>
>Regards
>Azher Amin
>-------------------------------
>http://www.consulttech.com.pk
>
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
More information about the asterisk-users
mailing list