[Asterisk-Users] PRI Errors

[Marcin Kuzmicki]

Hi,
Maybe I'm wrong but you have different oprators - two different switches
and you dont synchronize with them you dont use them as your 
timing source

I'd go like like this
 span=1,0,0,esf,b8zs
 span=2,0,0,esf,b8zs
 span=3,0,0,esf,b8zs
 span=4,0,0,esf,b8zs
 span=5,0,0,esf,b8zs
 span=6,0,0,esf,b8zs
 span=7,1,0,esf,b8zs
 span=8,2,0,esf,b8zs


rgrds


Quoting "Bisker, Scott (7805)" <sbisker at harvardgrp.com>:

> Update on this.  I had the exact same issue today.  At almost exactly the
> same time as yesterday.  Possible telco problem?  Timing issue with zaptel? 
> Never had this issue before updating libpri as of 3/8.
> 
> Here's zaptel.conf  span 7 is PRI from Verizon, span 8 is T-1 from Sprint. 
> Dual T400P, SMP....
> 
> #
> span=1,1,0,esf,b8zs
> span=2,1,0,esf,b8zs
> span=3,1,0,esf,b8zs
> span=4,1,0,esf,b8zs
> span=5,1,0,esf,b8zs
> span=6,1,0,esf,b8zs
> span=7,0,0,esf,b8zs
> span=8,0,0,esf,b8zs
> 
> e&m=1-12
> fxoks=13-24
> fxoks=25-48
> fxoks=49-72
> fxoks=73-96
> fxoks=97-120
> fxoks=121-144
> e&m=145-168
> bchan=169-191
> dchan=192
> 
>