[Asterisk-Users] Sipura line 1 outgoing voice problem?

[Chris Higgins]

Back in January I started having a problem with my Sipura (and there was 
at least one other on the list with the same problem) that if I answer 
an incoming call (via X100P) on line 1 of my Sipura, the caller cannot 
hear any voice from the internal extension.  If the internal user puts 
the external user on hold (via flash hook) and returns, both directions 
of audio are fine.

Line 2 never has had this problem.  For the meantime, I switched the 
internal phones so that my wife's favorite phone is line 2 and I told 
her to not pick up with line 1.  Not a very permanent solution :)

NAT is not an issue as the Sipura and * are on the same network.  Is 
anyone else having this problem?  It looks like other people are using 
Sipura (I saw one user with 30 of them ?!) and am surprised that nobody 
else is complaining about this problem.  I am willing to step through 
some sip debug if anyone is interested in the output.

* version: Asterisk CVS-02/08/04-22:22:57
Sipura firmware: 1.0.31 (just upgraded tonight to see if the problem 
would go away)

Relevent config sections:

--8<--  sip.conf  --8<--

[cordless1]
type=friend
username=cordless1
secret=xxx
host=dynamic
context=cordless1
dtmfmode=info
mailbox=1234
canreinvite=no
disallow=all
allow=alaw

[cordless2]
type=friend
username=cordless2
secret=xxx
host=dynamic
context=cordless2
dtmfmode=info
mailbox=1234
canreinvite=no
disallow=all
allow=alaw


-- Chris