[Asterisk-Users] Conference call?

[Greg Retkowski]

Not familiar with the snom's, but most IP phones implement 'conference'
internally.. It's a function of the phone independent of the PBX. However
if you set up conferencing on asterisk you can transfer someone into the
conference then dial it up yourself.. transfer is '#' followed by your
conference extension.

-- Greg

Greg Retkowski /     I.T. Infrastructure Consultant       /)/|//`
greg at rage.net  http://www.rage.net/~greg/ C:408-455-3913 /|/ /_/


On Mon, 15 Mar 2004, Justin Carlson wrote:

> do you know if there is a way to get the conference button on the snom
> 200's to work?
>
> -----Original Message-----
> From: Greg Retkowski [mailto:greg at rage.net]
> Sent: Monday, March 15, 2004 1:31 PM
> To: asterisk-users at lists.digium.com; Justin Carlson
> Subject: Re: [Asterisk-Users] Conference call?
>
>
>
> On Mon, 15 Mar 2004, Justin Carlson wrote:
>
> > how do I setup cal conferencing? and get three-way calling going?  I am
> just
> > looking for some direction as I am having difficulty deciding where to
> > start.
>
> Look at the meetme application, you have to configure meetme.conf, and
> have some meetme() commands in your extensions.conf. You will also need a
> timing device, such as a digium card. If you don't have any hardware
> device you'll want to install a software timing device, such as
> kernel module 'ztdummy'. Hope this helps!!
>
> -- Greg
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>