[Asterisk-Users] Consultants
Anton
seer at sphyrna.com
Sun Mar 14 01:19:57 MST 2004
Better get a hardware expert, We are currently adapting asterisk to a cpci
platform to get around the serious hardware limitations that digium always
stops at.
Anton
Sphyrna Inc
- We do what others dare not to-
----- Original Message -----
From: "Don Feuer" <dfeuer at cox.net>
To: <asterisk-users at lists.digium.com>
Sent: Saturday, March 13, 2004 10:04 PM
Subject: [Asterisk-Users] Consultants
We would like to look at the feasibility of utilizing * as a network
infrastructure for a unified communications platform. We would like a
list of consultants that work with * and have either developed a
platform which is easily usable in a true telco environment.
The system needs to have the following: Billing, voice and fax unified
messaging, integration with h323, sip, aix to produce a Vonage type of
service.
Please forward your information to dfeuer at cox.net
Sincerely,
Don Feuer
(949) 279-5290
-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of
asterisk-users-request at lists.digium.com
Sent: Friday, March 12, 2004 6:25 AM
To: asterisk-users at lists.digium.com
Subject: Asterisk-Users digest, Vol 1 #3083 - 14 msgs
Send Asterisk-Users mailing list submissions to
asterisk-users at lists.digium.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.digium.com/mailman/listinfo/asterisk-users
or, via email, send a message with subject or body 'help' to
asterisk-users-request at lists.digium.com
You can reach the person managing the list at
asterisk-users-admin at lists.digium.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Asterisk-Users digest..."
Today's Topics:
1. Re: SIP call to ISDN subscriber (Derek Bruce)
2. Re: PCI front mount chassis? (Stephen Davies)
3. RE: XML Phone book software. (Alexander Romanov)
4. E1 cards in Australia (Alexander Romanov)
5. UDC SYSTEMS (Michael Devenijn)
6. Fax redirection problem (Nicolas Bougues)
7. call bridge (Alessio Focardi)
8. Native Bridge and Billing (Daniel Bichara)
9. Re: E1 cards in Australia (Peter Brown)
10. Re: PCI front mount chassis? (Rich Adamson)
11. Help on two subjects (David J Carter)
12. Re: asterisk-oh323, new version 0.5.10 (Michael Manousos)
13. Re: asterisk-oh323 (Michael Manousos)
14. Re: XML Phone book software. (stan)
--__--__--
Message: 1
From: "Derek Bruce" <dbruce at calgarytelecom.com>
To: <asterisk-users at lists.digium.com>
Subject: Re: [Asterisk-Users] SIP call to ISDN subscriber
Date: Fri, 12 Mar 2004 02:45:16 -0700
Organization: Calgary Telecom
Reply-To: asterisk-users at lists.digium.com
try adding:
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind connect enable 8
to the dial-peer on the Cisco GW...
----- Original Message -----
From: "Manuel Goertz" <mgoertz at KOM.tu-darmstadt.de>
To: <asterisk-users at lists.digium.com>
Sent: Friday, March 12, 2004 2:26 AM
Subject: [Asterisk-Users] SIP call to ISDN subscriber
>
> Hi all,
>
> I have a problem calling from a sipset to a ISDN subscriber over
> a CISCO 1760 GW.
> The following setup is used.
> UA ---> GW ---> ISDN
> The UA is a sipset, the GW is the CISCO 1760 with ISDN BRI interface
> and a standard ISDN subscriber.
> The UA is registered with a registrar/proxy.
> All numeric userparts of the SIP URI are routed to the GW.
> The GW's BRI interface is connected to the PSTN.
> The call signaling seems to work as the SIP phone indicates ringing
> and the ISDN phone is ringing. After picking up the hook of the ISDN
> phone the UA shows "In Call". But after a second the call is
> terminated. The log shows that the GW sends to both side the call
> termination messages. TX -> DISCONNECT "Normal Call Clearing" to the
> ISDN side and a BYE message to the SIP side.
> The signaling in short:
>
> UA GW ISDN
> INVITE -> |
> <- 100 Try
> | TX -> SETUP
> | RX <- CALL_PROC
> | RX <- ALERTING
> <- 183 Sess |
> | RX <- CONNECT
> | TX -> CONNECT_ACK
> <- 200 OK |
> Milliseconds later !
> | TX -> DISCONNECT
> | RX <- RELEASE
> | TX -> RELEASE_COMP
> <- BYE |
> 200 OK -> |
>
>
> Any hints how to solve this problem.
>
> Thanks
>
> Manuel
>
>
>
>
>
>
>
>
> --
> +KOM----------------------------------------------------------------+
> |Manuel Görtz Merckstrasse 25|
> |Darmstadt University of Technology 64283 Darmstadt, Germany|
> |Multimedia Communications Tel: (+49) 6151 16-5175|
> |Multimedia Networking & Distribution Fax: (+49) 6151 16-6152|
> +----------------------------------------------------------------KOM+
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--__--__--
Message: 2
Date: Fri, 12 Mar 2004 12:32:40 +0200 (SAST)
From: Stephen Davies <steve at daviesfam.org>
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] PCI front mount chassis?
Reply-To: asterisk-users at lists.digium.com
On Fri, 12 Mar 2004, Brian Capouch wrote:
> I too am running 6 cards in my system, although not in a "high traffic
> capacity" load environment.
>
> So far my (limited) high-load simulations have shown no problems.
So - is it apocryphal that the Digium cards (drivers) won't share
interrupts?
If there is a real issue with sharing interrupts then it seems to me
to be a bug that needs fixing. PCI bus supports shared interrupts,
why doesn't the hardware/driver?
Yours curiously,
Steve
--__--__--
Message: 3
From: "Alexander Romanov" <alex at rnsinternational.com.au>
To: <asterisk-users at lists.digium.com>
Subject: RE: [Asterisk-Users] XML Phone book software.
Date: Fri, 12 Mar 2004 21:53:10 +1100
Reply-To: asterisk-users at lists.digium.com
Hi All,
Does anyone have Digium E1 cards in production in Australia? Are any of
them
certified?
Any feedback would be appreciated.
Thaks
Alex.
--__--__--
Message: 4
From: "Alexander Romanov" <alex at rnsinternational.com.au>
To: <asterisk-users at lists.digium.com>
Date: Fri, 12 Mar 2004 21:57:59 +1100
Subject: [Asterisk-Users] E1 cards in Australia
Reply-To: asterisk-users at lists.digium.com
Sorry for double post. Wrong subject :-)
Hi All,
Does anyone have Digium E1 cards in production in Australia? Are any of
them
certified?
Any feedback would be appreciated.
Thaks
Alex.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--__--__--
Message: 5
Date: Fri, 12 Mar 2004 11:57:22 +0100
From: "Michael Devenijn" <Michael.Devenijn at dkma.be>
To: <asterisk-users at lists.digium.com>
Subject: [Asterisk-Users] UDC SYSTEMS
Reply-To: asterisk-users at lists.digium.com
Does anybody have experience with these units ??
=20
http://www.udcsystems.com/
DISCLAIMER: The content of this e-mail message does not constitute a =
commitment of DKMA bvba This e-mail and any attachments thereto may =
contain information which is confidential and/or protected by =
intellectual property rights and are intended for the intended recipient
=
only. Any use of the information contained herein ( including, but not =
limited to, total or partial reproduction, communication or distribution
=
in any form ) by persons other than the designated recipient(s) is =
prohibited.If an addressing or transmission error has misdirected this =
e-mail, please notify the author, either by telephone or by e-mail and =
delete the material from any computer.
--__--__--
Message: 6
Date: Fri, 12 Mar 2004 12:41:35 +0100
From: Nicolas Bougues <nbougues-listes at axialys.net>
To: asterisk-users at lists.digium.com
Organization: Axialys Interactive http://www.axialys.net
Subject: [Asterisk-Users] Fax redirection problem
Reply-To: asterisk-users at lists.digium.com
More information about the asterisk-users
mailing list