[Asterisk-Users] Dial via X100P

[Asterisk Learner]

It does not dial a 1. The '1' denotes the Zap channel number which in
this case is probably your X100P. Zap channels are assigned to Zap ports
depending on the order in which you do a modprobe on them.


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Bill
Michaelson
Sent: Saturday, March 13, 2004 2:18 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Dial via X100P

Just connected my X100P to Verizon.  I stumbled across a config that 
works, for the moment, with this Dial command:

;this works, because it prefixes a 1 on the dialing.  But why does
it?...
exten => _NXXXXXX,1,Dial(Zap/1/609${EXTEN}|55)

The comment says it all.  The card/SW seems to dial a 1 before it dials 
the 609${EXTEN}

Unless I'm misinterpreting what is happening?

This obviously limits my possibilities.  Can somebody explain to me why 
it dials 1, or appears to?

-- 
Bill Michaelson - COS, Incorporated - Software Development -
bill at cosi.com
Thanks for putting up with my spam filter!


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users