[Asterisk-Users] Running asterisk with voicetronix (fwd)

[andrewg at felinemenace.org]

On Wed, Mar 10, 2004 at 07:37:03AM -0600, Jim Sneeringer wrote:
> I have been told that Voicetronics cards are not supported by Asterisk, but
> I don't know for sure. 

I used to use the VPB4 cards.

> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Augustine Olaifa
> Sent: Wednesday, March 10, 2004 2:09 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Runing asterisk with voicetronix (fwd)
> 
> 
> 
> i am running asterisk, CVS -02/24/04 -13.55.19 (version)
> 
> i am have a voicetronix openswitch12 card.
> i have installed the driver  with"modprobe" it loads fine.
> But when i run asterisk i get a seg fault, this
> seg fault occurs at different parts of thye running asterisk . for example
> on a first run it gives the fault at [app.qcall.so] , on the second run it
> stops at another position say [app.adsiprog]. when forcefully run say  10
> times consecutively it reaches the asterisk prompt then gives the seg
> fault.It also shows "starting vpb monitor thread....."
> 
> please , someone that has the card(openswitch12 voicetronix) working
> should help me with suggestions on how to get the card working.

When I was using those cards (and other segfaults I've hard in asterisk) was based about incorrect
/outright wrong configuration entries. What does your vpb.conf look like?

> 
> 
> regards
> 
> Olaifa Augustine
> General Data Engineering Services Ltd
> 18b oshin road,kongi bodija
> p.o.box 29460, secretariate,
> ibadan.
> tel:- 234-2-8105156
>