[Asterisk-Users] From 0 to PBX in 2 hours

[amg at intercable.com.ve]

Hi Kevin!

Try with mc
It´s an file manager, ftp client, text editor, hex viewer and swiss amry
knife for non skilled as me in vi, there´s and RPM for it , but maybe´s
it´s already installed on your linux-box.

Andres Mendez





                                                                                                                        
                      "Kevin"                                                                                           
                      <Asterisk at gtcus.c        To:       <amg at intercable.com.ve>                                        
                      om>                      cc:                                                                      
                                               Subject:  RE: [Asterisk-Users] From 0 to PBX in 2 hours                  
                      09/03/2004 06:42                                                                                  
                      p.m.                                                                                              
                                                                                                                        
                                                                                                                        




Congratulations on your success with asterisk. I have followed a similar
approach but I am stuck with the "vi" editor.  When I use vi on redhat,
I insert text by typing 'i' then type.  When I try the same under Mepis,
I can't insert.  Any pointers?

Thanks,

Kevin



-----Original Message-----
From: amg at intercable.com.ve [mailto:amg at intercable.com.ve]
Sent: Tuesday, March 09, 2004 3:16 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] From 0 to PBX in 2 hours


Hi everyone,

As an newbie in * and knowing how hard Linux can be for starters (more
if
you come from the world of MSwindows.), I triyed  a way to teach my
co-workers how to deploy fast and in less than two hours a small but
perfect working PBX.

I used the following equipment:

1 Clarent CPG 101 (A.K.A. D-link 104s) 4 FXS ports
1 PC Celeron 500Mhz 128MB Ram

The following software:
1 Mepis Installation CD,

and a cable Internet link.

Booted up the computer with the Mepis (Debian based) CD, installed Linux
in
the Hard disk, 15 minutes or less. Updated the firmware and the boot
prom
to  versions 3.0B35-C and 3.0B14-C in the Clarents respectively, runned
apt-get install asterisk, and then begun to figure out how to configure
the
mgcp gateways. So far whe have deployed in two days 5 locations and
starting to connect Barquisimeto, Venezuela, with Buenos Aires,
Argentina.

Hope that helps someone and encourage others to start in this great
world
of telecomunications

AMG

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users