[Asterisk-Users] From 0 to PBX in 2 hours

[Abdul Hakeem]

Hi,
Yes, and many thanks for the offer.
Can you email  or arrange for FTP ?
Cheers,
Abdul Hakeem


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Matthew
Marlowe
Sent: 10 March 2004 11:31
To: Asterisk Users
Subject: RE: [Asterisk-Users] From 0 to PBX in 2 hours


I've got a VP206 here. Want it? :) 

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> Abdul Hakeem
> Sent: Wednesday, March 10, 2004 3:54 AM
> To: Asterisk Users
> Subject: RE: [Asterisk-Users] From 0 to PBX in 2 hours
> Importance: High
> 
> Hello,
> Does anyone know if a GUI for Asterisk exists ?
> Regards,
> Abdul Hakeem
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of hank
> Sent: 10 March 2004 01:43
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] From 0 to PBX in 2 hours
> 
> 
> what is your easy start up guide?
> ----- Original Message -----
> From: <amg at intercable.com.ve>
> To: <asterisk-users at lists.digium.com>
> Sent: Tuesday, March 09, 2004 12:16 PM
> Subject: [Asterisk-Users] From 0 to PBX in 2 hours
> 
> 
> >
> > Hi everyone,
> >
> > As an newbie in * and knowing how hard Linux can be for
> starters (more
> 
> > if you come from the world of MSwindows.), I triyed  a way
> to teach my
> 
> > co-workers how to deploy fast and in less than two hours a
> small but
> > perfect working PBX.
> >
> > I used the following equipment:
> >
> > 1 Clarent CPG 101 (A.K.A. D-link 104s) 4 FXS ports
> > 1 PC Celeron 500Mhz 128MB Ram
> >
> > The following software:
> > 1 Mepis Installation CD,
> >
> > and a cable Internet link.
> >
> > Booted up the computer with the Mepis (Debian based) CD, installed
> > Linux
> in
> > the Hard disk, 15 minutes or less. Updated the firmware and
> the boot
> > prom to  versions 3.0B35-C and 3.0B14-C in the Clarents
> respectively,
> > runned apt-get install asterisk, and then begun to figure
> out how to
> > configure
> the
> > mgcp gateways. So far whe have deployed in two days 5 locations and
> > starting to connect Barquisimeto, Venezuela, with Buenos Aires, 
> > Argentina.
> >
> > Hope that helps someone and encourage others to start in this great
> > world of telecomunications
> >
> > AMG
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com 
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users