RES: [Asterisk-Users] SIP Conference Bridge?

[Vinicius Viana]

Asterisk needs a timing source to do conference.

If you don't have a Zaptel interface installed but have a uhci-usb interface
you can use the ztdummy to generate the timing.

To use it you need to go to the zaptel driver directory and modify the
Makefile removing the double minus (--) in front of ztdummy.c

After this do a make clean and a make install and modprobe ztdummy

Other thing, in order to ztdummy works you need to have the uhci-usb
installed as a module and not in the kernel.

Regards,

Vinicius

-----Mensagem original-----
De: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]Em nome de Todd R. Stroup
Enviada em: segunda-feira, 8 de março de 2004 17:04
Para: asterisk-users at lists.digium.com
Assunto: [Asterisk-Users] SIP Conference Bridge?


Can Asterisk act as a SIP conference bridge?  Looking through the source I
notice that it's required to have a Zaptel interface installed.  Why is this
a requirement?  Can you not mesh the VoIP streams together?

Thanks,

T..S

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.602 / Virus Database: 383 - Release Date: 01/03/2004

---

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.602 / Virus Database: 383 - Release Date: 01/03/2004