[Asterisk-Users] Help Newbie: TDM Development Kit

[willy at yponeinc.com]

Hi!
I am a complete newbie at *asterisk.
I am somwhat stumped.  I have *asterisk successfully running
on a FC-1 distro.
modprobe indicates that wcfxo and wcfxs are successfully
installed.
To get things started, I setup a simple SIP with two clients
(softphones) on my home LAN.
This works OK.  I used the setup example (slightly modified)
from the Jon Todd article.
http://www.onlamp.com/pub/a/onlamp/2003/07/03/asterisk.html?page=1
and I found instructions on the X-lite phones.  It appears
to work.
Then, I recieved the Digium development kit X100P and
TDM400P.
I added a line to my extensions as follows:
exten => _9.,1,Dial(ZAP/1/${EXTEN})
Figuring that anything which starts with a 9 should dial
outside the box.
Asterix console reports the following error:
app_dial.c:533 dial_exec: Unable to create channel of type
'ZAP'
Now, I probably need to do something to the zapata.conf
file, but I have no idea what.
Of course, the kit also has a TDM400P card.  I have a phone
plugged into it, but (needless to say) there is no dial tone
or anything.
Help Please ...
willy