[Asterisk-Users] E1 Red Alarm

[Anton Tinchev]

Check the crossover cable.
Nicholas Bachmann wrote:

> Howdy -
>
> I'm trying to get a Malaysian PRI E1 up on a TE410P, with no luck.  
> Right now, the setup is
>
> Telco -> HDSL -> WorldDSL UTU801-> 2 BNC E1 -> balun -> crossover -> 
> TE410P
>
> Right now, the CSU/DSU-ish WorldDSL box has a green light indicating 
> E1 sync, but the TE410P shows a red alarm.  I checked the card by 
> plugging the crossover from port 1 to port 2 on the 410 (it worked 
> fine).  It I change any of the cabling (i.e. swap things around), the 
> green light goes off.
>
> I have my suspicions about the balun 
> (http://www.ctcu.com/catalog/datacom/balun.pdf).  Would a DB15F-RJ45 
> converter be better the the BNC-balun-RJ45 arrangement we have now?
>
> Here's my zaptel.conf:
> span=1,1,0,ccs,hdb3
> bchan=1-15
> dchan=16
> bchan=17-31
>
> The telco line IS working; it was tested and put in a couple of days 
> ago.  Any ideas why this isn't working?
>
> Nick
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users