[Asterisk-Users] TDM400 hardware problems?

[Steve Creel]

On Thu, 3 Mar 2004, John Morris wrote:

>So I reboot, and try to bring things back up again.  But now the first
>two channels on my TDM400 aren't working, a new one.  The light on
>them isn't glowing, and installing the module I get this:
>
>Feb 29 01:09:15 squid kernel: Zapata Telephony Interface Registered on major 19\6
>Feb 29 01:09:18 squid kernel: Freshmaker version: 62
>Feb 29 01:09:28 squid kernel: Freshmaker passed register test
>Feb 29 01:09:28 squid kernel: Timeout waiting for calibration of module 0
>Feb 29 01:09:28 squid kernel: ProSlic died on Calibration.
>Feb 29 01:09:28 squid kernel: Module 0: Not installed
>Feb 29 01:09:28 squid kernel: Timeout waiting for calibration of module 1
>Feb 29 01:09:28 squid kernel: ProSlic died on Calibration.
>Feb 29 01:09:28 squid kernel: Module 1: Not installed
>Feb 29 01:09:28 squid kernel: Module 2: Initialized
>Feb 29 01:09:28 squid kernel: Module 3: Initialized
>Feb 29 01:09:28 squid kernel: Found a Wildcard FXS: Wildcard S400P Prototype (4\ modules)
>
>Luckily, at least the last two are working, so I plugged my extensions
>into those, modified extensions.conf to reflect the change, and I'm
>working again for the moment.

The archives say Martin suggested something to try for this error:
http://lists.digium.com/pipermail/asterisk-users/2003-August/017174.html

Have you tried reseating the modules on the card?  If you switch modules
0,1 with 2,3 does the problem follow?

Other than that, I'm not of much help to you....

Good luck,
Steve