[Asterisk-Users] H323 calls drop on connect

[Michael Manousos]

Todd Wallace wrote:
> New release of * or OH323?

asterisk-oh323. And I refer to the problem of the wrong
answer supervision.

Michael.



> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Michael Manousos
> Sent: Wednesday, March 03, 2004 4:31 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] H323 calls drop on connect
> 
> 
> 
> This problem has been fixed. Expect a new release soon.
> 
> Michael.
> 
> 
> T. Chan wrote:
> 
>>That is not good, isn't it?
>>So, it seems that something is not right there already, why don't you 
>>use the other H323 channel driver and give it a try
>>
>>-----Original Message-----
>>From: asterisk-users-admin at lists.digium.com
>>[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Todd 
>>Wallace
>>Sent: Tuesday, March 02, 2004 7:21 PM
>>To: asterisk-users at lists.digium.com
>>Subject: RE: [Asterisk-Users] H323 calls drop on connect
>>
>>
>>Right after the call setup was completed...
>>
>>Todd
>>
>>-----Original Message-----
>>From: asterisk-users-admin at lists.digium.com
>>[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of T. Chan
>>Sent: Tuesday, March 02, 2004 4:01 PM
>>To: asterisk-users at lists.digium.com
>>Subject: RE: [Asterisk-Users] H323 calls drop on connect
>>
>>
>>Hi, Todd
>>
>>Did you notice that when you made the calls, were the calls indicated 
>>as "answered", in both cases? And if so, did the indication "answered" 
>>pop up when the calls were actually picked up and answered or right 
>>after the call setup was completed
>>
>>-----Original Message-----
>>From: asterisk-users-admin at lists.digium.com
>>[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Todd 
>>Wallace
>>Sent: Tuesday, March 02, 2004 4:30 PM
>>To: asterisk-users at lists.digium.com
>>Subject: [Asterisk-Users] H323 calls drop on connect
>>
>>
>>
>>I have something new that is happening to me...When I call from a SIP 
>>phone and route out OH323, I get a good clear ringing, connect, then 
>>it drops me. If I get a telco recorded message, I hear the complete 
>>message.  If I get a person that answers, I hear about the first 2 
>>seconds, then it drops me.
>>
>>Any ideas where it look?  I feel it is in the OH323 config..
>>
>>
>>Todd
>>
>