[Asterisk-Users] cisco phone and parked calls

[Joe Antkowiak]

Does anyone have any input on this?  I tried using what Craig said
above, but it didn't work...



On Wed, 30 Jun 2004 13:02:46 -0400, Joe Antkowiak <antkojm1 at gmail.com> wrote:
> 
> So, in order to use the parking extension configured in parking.conf,
> I have to configure that extension under a [parkedcalls] context in my
> extensions.conf?  I thought the call parking app was supposed to take
> care of that for me?
> 
> 
> On Tue, 29 Jun 2004 23:49:54 +0100, Craig Waddington
> <craig at xmbsystems.com> wrote:
> >
> >
> > In my sip extensions context I have
> >
> > include => parkedcalls
> >
> > In extensions.conf I have
> >
> > [parkedcalls]
> > Exten => 2000,1,Answer
> >
> > In parking.conf I have the same.
> >
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Joe
> > Antkowiak
> > Sent: 29 June 2004 22:56
> > To: asterisk-users at lists.digium.com
> > Subject: [Asterisk-Users] cisco phone and parked calls
> >
> > sent this before, but it bounced back and didn't show up on the list.
> > If it did get sent, I apologize.
> >
> > ---------- Forwarded message ----------
> > From: Joe Antkowiak <antkojm1 at gmail.com>
> > Date: Tue, 29 Jun 2004 14:55:25 -0400
> > Subject: cisco phone and parked calls
> > To: asterisk-users at lists.digium.com
> >
> > So, I can't figure out how to get the parkandannounce application to
> > work the way I want it to...  I have cisco 7960 IP phones using SIP,
> > and this is what I have in my extensions.conf:
> >
> > exten =>
> > 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${E
> > XTEN:1},1)
> > exten => 700,2,Hangup
> >
> > and in my parking.conf:
> >
> > [general]
> > parkext => 700                          ; What ext. to dial to park
> > parkpos => 701-720                      ; What extensions to park calls
> > on
> > context => parkedcalls                  ; Which context parked calls are
> > in
> > parkingtime => 180
> >
> > In order for the person parking the call to hear what parked extension
> > the call is on, they have to do the transfer by pressing # and dialing
> > 700.  When the user uses the transfer function on the cisco phone, it
> > still correctly parks the call, but never tells the person what
> > extension its parked on.
> >
> > Also, for some reason, I had to create that 700 extension, it always
> > complains that it can't find 700 when I don't do that, even though
> > parkedcalls is included in the internal context...
> >
> > Any suggestions?
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 


-- 
____________
Joe Antkowiak
antkojm1 (at) gmail.com