[Asterisk-Users] t100p configuration troubles

Paul Concepcion pconcepcion at mb.capyi.ca
Tue Jun 29 10:55:41 MST 2004


I've put a t100p in our * server and I'm having trouble configuring
it. It is directly connected to an Adtran TA 750 channel bank with two
FXO cards (8 analog incoming lines total). I'm able to insmod and
modprobe both zaptel and wct1xxp with no trouble, but when I start *
with /usb/sbin/asterisk -c I get the following output:

[root at rosella root]# /usr/sbin/asterisk -c
Asterisk CVS-HEAD-05/28/04-08:04:00, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <markster at digium.com <mailto:markster at digium.com>>
=========================================================================
[ Booting............    -- SIP Seeding 'phone1' at
phone1 at 192.168.0.158:5060 for 3600
   -- SIP Seeding 'phone2' at phone2 at 192.168.0.176:5060 for 3600
   -- SIP Seeding 'phone3' at phone3 at 192.168.0.167:5060 for 3600
.......Jun 29 11:56:33 WARNING[-1084538752]: chan_skinny.c:2541
reload_config: Unable to get our IP address, Skinny disabled
..Jun 29 11:56:33 WARNING[-1084538752]: chan_zap.c:704 zt_open: Unable
to specify channel 1: No such device or address
Jun 29 11:56:33 ERROR[-1084538752]: chan_zap.c:5499 mkintf: Unable to
open channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Jun 29 11:56:33 ERROR[-1084538752]: chan_zap.c:7652 setup_zap: Unable
to register channel '1-24'
Jun 29 11:56:33 WARNING[-1084538752]: loader.c:326 ast_load_resource:
chan_zap.so: load_module failed, returning -1
Segmentation fault

I followed the instructions from
http://www.digium.com/downloads/hw_article 
<http://www.digium.com/downloads/hw_article>, so I'm unsure what to do
next. My configs:

[root at rosella root]# cat /etc/asterisk/zaptel.conf
span=1,0,0,esf,b8zs
fxoks=1-24
[root at rosella root]# cat /etc/asterisk/zapata.conf
[channels]
signalling=fxo_ls
context=default
group=1
channel => 1-24
[root at rosella root]#

========================
I'm really excited to get this system going, so any advice anyone
could offer would be very much appreciated.

-paul

-- 
Paul Concepcion
HelpCan Computer Technical Services, Inc.




More information about the asterisk-users mailing list