"overlap" digits (was: RE: [Asterisk-Users] PRI & immediate=no)

[Thomas Schroeter]

Hi *,
I can specify my question:

When calling from analogue phones, the whole number (6+3 digits) 
does not come "ISDN-style" (=9 digits as a whole), but at first the 6 
digits, and the 3 additional ones in the "INFO" field of the ISDN 
protocol.

Here's what extensive debuggin says:
---
< Message type: INFORMATION (123)
< Called Number (len= 6) [ Ext: 1  TON: Subscriber Number (4)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '999' ] Sending 
Receiver
Ready (49)
---

How can Asterisk receice these digits?


Regards,
thomas



On 21 Jun 2004 at 18:53, Thomas Schroeter wrote:

> > > I have got the following problem (E100P, pri_cpe):
> > > My number range is <6digits>xyz. (e.g. 123456-999)
> > > >From ISDN phones, everything's fine, but calling in from analogue
> > > >phones causes the
> > > following problem: Asterisk only receives the first 6 digits.
> > Do you have overlapdial=yes in your zapata.conf?
> 
> Yes, I have.
> Hope that helps...?
> 
> 
> Regards,
> Thomas
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users