[Asterisk-Users] miserable time with Cisco ATA186

Matthew Simpson matthew at symatec-computer.com
Fri Jun 4 06:52:46 MST 2004


If I turn allow=ulaw on only, asterisk tries to use it

a=rtpmap:0 PCMU/8000

but the ATA says it doesn't have it:

Answering/Requesting with root capability 4
Answering with non-codec capability 0x1(G723)

If I turn allow=alaw on only or with allow=ulaw, asterisk sends it, the ATA
says it has it [alaw], but it still won't negotiate it.

I think the stupid ATA is just determined to use G723 no matter what... I
have LBRCodec set to 3 which should have it try to use G729, but it still
tries to use G723.  The AudioMode setting has a parameter bit to "Enable
G711 only", but I'm not sure how that bit thing works.  Either the default
0x00150015 or the recommended 0x00140014 fails.  [btw, bit 1 should be "1"
to enable G711 only, if someone can help me there].

I'm seriously about to punt this thing into the garbage.

Help!

thanks,
matt

> From: "Timothy R. McKee" <tim at baseworx.net>
> To: <asterisk-users at lists.digium.com>
> Subject: RE: [Asterisk-Users] miserable time with Cisco ATA186
> Date: Fri, 4 Jun 2004 00:04:22 -0400
> Reply-To: asterisk-users at lists.digium.com
>
> Noticed that he has ALAW set as the preferred codec on the ATA.  I'd
suggest
> testing with allow of ulaw only, then try turning on other codecs.  We
know
> that one works well.
>
>
>
> ====================================================================
> Timothy R. McKee
>
>
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Eric Wieling
> Sent: Thursday, June 03, 2004 23:36
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186
>
> Perhaps, but *I* at least had decent luck with 2.16.1.  I suspect he has
> allow=all and the codec that ends up being used is G723.1 and then, of
> course, everything goes to hell.
>
>
> On Thu, 2004-06-03 at 22:59, brian k. west wrote:
> > because 2.16.1 has some bugs.. you need 2.16.2 or higher.
> >
> > bkw
> >




More information about the asterisk-users mailing list