[Asterisk-Users] TE410P Q.931

[Steven Critchfield]

Just an addition because I didn't see it mentioned, you need to also get
libpri from the same cvs server as asterisk and install it.

On Thu, 2004-06-03 at 09:43, Simon wrote:
> Got this in
> /etc/asterisk/zapata.conf
> [channels]
> context=default
> signalling=pri_cpe
> ;switchtype=euroisdn
> rxwink=300 ; Atlas seems to use long (250ms) winks
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> echocancel=yes
> rxgain=0.0
> txgain=0.0
> immediate=no
> musiconhold=default
> 
> pridialplan=international
> ; Channels inherit configuration above them
> ; Span 1
> 
> group=1
> channel => 1-15
> channel => 17-31
> 
> 
> signalling=pri_cpe
> ;switchtype=euroisdn
> 
> group=2
> channel => 32-46
> channel => 48-62
> signalling=pri_cpe
> ;switchtype=euroisdn
> 
> group=3
> channel => 63-77
> channel => 79-93
> signalling=pri_cpe
> ;switchtype=euroisdn
> group=4
> channel => 94-108
> channel => 110-124
> 
> and this in
> etc/zaptel.conf
> 
> span=1,0,0,ccs,hdb3,crc4
> span=2,0,0,ccs,hdb3,crc4
> span=3,0,0,ccs,hdb3,crc4
> span=4,0,0,ccs,hdb3,crc4
> bchan=1-15
> bchan=17-31
> bchan=32-46
> bchan=48-62
> bchan=63-77
> bchan=79-93
> bchan=94-108
> bchan=110-124
> dchan=16
> dchan=47
> dchan=78
> dchan=109
> loadzone = uk
> defaultzone=uk
> 
> would this look right ?
> using zttool i am seeing span 1 OK span 2 YELLOW
> 
> only got 1 & 2 plugged in
> 
> Simon
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Apollon
> Koutlides
> Sent: 03 June 2004 14:17
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] TE410P Q.931
> 
> 
> Simon wrote:
> 
> >Can anyone help i have * running on debian with a te410p , my telco tells
> me
> >i need it to run in Q.931 anyone know how to make this happen ?
> >
> >
> That's the Layer 2 protocol, PRI signalling. You would obviously do CPE
> signalling (insert a line signalling=pri_cpe in
> /etc/asterisk/zaptel.conf) - first you need to get Layer 1 up, of
> course, and define which channel to be used for signalling in
> /etc/zapata.conf ( dchan=XX ).
> 
> Apollon Koutildes
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield <critch at basesys.com>