[Asterisk-Users] Syntax for 2 ISDN Cards

[Thomas Niesel]

On Wed, Jun 02, 2004 at 09:27:14AM +0200, Gunnar Schaller wrote:
...cut

> >> chan_capi.c:1147 capi_request: didn't find capi device with outgoing
> >> msn = 7502. you should check your config!
> >> app_dial.c:673 dial_exec: Unable to create channel of type 'CAPI'
> >> == Everyone is busy at this time
> 
> > Do you have 4 b-channels? (2 Lines with 2 channels)
> > According to your email you are in germany, there you need a 2nd NTBA.
> > Well, I could be wrong at all, just my thoughts.
> 
> Yes there are 4 b-channels and yes it's germany :o)
> There are 2 lines with 2 b-channels each. My Asterisk operates at a
> internal telephone system. As I wrote I can do 2 simultaneous
> connections, in this case capi info shows that contr1 has no free
> channels.

Next questions:
Can you see any messages from 2nd line/card via isdnlog?
Can you call your * via the other cards?
What msn's do the two established calls use?
Do you try to access a 3rd call with msn's from first line?
Is it right that you have only two msn's in the capi.conf


-- 
Tho/\/\as