[Asterisk-Users] MGCP & Cisco ATA 186 Help

[Leo Ann Boon]

My ATA with V3.0 firmware works fine.

Check that test can be resolved by your DNS or is in /etc/hosts. You 
might just want to put the IP address directly.


Dmitri Baranov wrote:

>Does anybody has the expirience configuring Asterisk with Cisco ATA 186
>MGCP firmware ? 
>
>I have Cisco software v3.1.1 atamgcp (Build 040629A) 
>Asterisk 1.0-RC1 
>
>On ATA i only put domain test. 
>mgcp.conf looks like this 
>[test] 
>host = 192.168.195.55 
>context = default 
>line => aaln/2 
>line => aaln/1 
>
>Asterisk CLI shows this: 
>
>Jul 31 16:05:40 WARNING[135449600]: chan_mgcp.c:485 __mgcp_xmit:
>mgcp_xmit returned -1: Address family not supported by protocol family 
>
>*CLI> Jul 31 16:05:41 WARNING[135449600]: chan_mgcp.c:595 retrans_pkt:
>Maximum retries exceeded for transaction 1 on [test] 
>Jul 31 16:05:41 WARNING[135449600]: chan_mgcp.c:595 retrans_pkt: Maximum
>retries exceeded for transaction 2 on [test] 
>Jul 31 16:05:41 NOTICE[135449600]: chan_mgcp.c:2234 handle_response:
>Transaction 2 timed out 
>Jul 31 16:05:41 NOTICE[135449600]: chan_mgcp.c:2234 handle_response:
>Transaction 1 timed out 
>
>*CLI> Jul 31 16:05:44 NOTICE[135449600]: chan_mgcp.c:1474
>find_subchannel: Gateway 'test' (and thus its endpoint '*') does not
>exist 
>mgcp debug 
>MGCP Debugging Enabled 
>*CLI> MGCP read: 
>RSIP 1 *@test MGCP 1.0 
>RM: restart 
>
>from 192.168.195.55:2427Verb: 'RSIP', Identifier: '1', Endpoint:
>'*@test', Version: 'MGCP 1.0' 
>2 headers, 0 lines 
>Jul 31 16:06:03 NOTICE[135449600]: chan_mgcp.c:1474 find_subchannel:
>Gateway 'test' (and thus its endpoint '*') does not exist
>  
>