[Asterisk-Users] faxing

Steve Underwood steveu at coppice.org
Thu Jul 29 19:45:44 MST 2004


Wrong way around. It is passive mode which is giving trouble. I need to 
fix the firewalling. Active mode should be OK right now.

Regards,
Steve

Lee Howard wrote:

> Seemed to be some problem with passive mode.
>
> Lee.
>
>
> On 2004.07.29 16:51 Lee Howard wrote:
>
>> And if you then do an 'ls'?
>>
>> It hangs on me there.
>>
>> Lee.
>>
>>
>> On 2004.07.29 16:40 Lyle Giese wrote:
>>
>>> Don't use a browser.  Use an ftp client and I connected just fine to
>>> ftp.opencall.org anonymously.
>>>
>>> Lyle
>>>
>>> ----- Original Message -----
>>> From: "Vladyslav" <vladk at azhelp.net>
>>> To: "Asterisk-users" <asterisk-users at lists.digium.com>
>>> Sent: Thursday, July 29, 2004 11:28 AM
>>> Subject: Re: [Asterisk-Users] faxing
>>>
>>>
>>> > What's wrong with
>>> > ftp://ftp.opencall.org/pub/
>>> >
>>> > It says "Can't open data connection"
>>> >
>>> >
>>> > On Thu, 2004-07-29 at 17:44, Steve Underwood wrote:
>>> > > matthew at txlink.net wrote:
>>> > >
>>> > > >What are your experiences with faxing through Asterisk to the
>>> PSTN?
>>> > > >
>>> > > >We are using g.711u as a codec, and are originating/terminating
>>> with
>>> Broadvox as
>>> > > >well as through our own PSTN gateways.
>>> > > >
>>> > > >We have had some luck with incoming faxes coming into our network
>>> from
>>> Broadvox
>>> > > >DIDs.  They work 50% of the time.  Not sure yet on PSTN incoming
>>> since
>>> nobody
>>> > > >that is using FAX is in our local rate centers.
>>> > > >
>>> > > >Outgoing has been bad.  It seems to work the best if the Sipura
>>> user
>>> agents have
>>> > > >echo cancelation off, but we have to have echo cancelation on our
>>> outbound
>>> > > >gateways or there is echo in the voice path.  Faxing outbound
>>> works
>>> very
>>> > > >rarely, and if it does, it usually can only send a page or two
>>> before
>>> we get
>>> > > >the infamous "Poor line condition".
>>> > > >
>>> > > >Does anyone have a suitable FAX setup working?
>>> > > >
>>> > >
>>> > > Using G.711 u or A may work, but don't count on it. Take a look at
>>> > > http://www.opencall.org/faq
>>> > >
>>> > > Regards,
>>> > > Steve
>>




More information about the asterisk-users mailing list