[Asterisk-Users] faxing

Joshua McClintock joshm at singlestep.com
Thu Jul 29 16:57:51 MST 2004


You may need to use 'passive' ftp.

http://compnetworking.about.com/cs/novellgroupwise/ht/setpassiveftpie.htm

The above is a link for Internet Explorer.

Give it a try...it could be a firewall problem on your side.

On Thu, 2004-07-29 at 16:51, Lee Howard wrote:
> And if you then do an 'ls'?
> 
> It hangs on me there.
> 
> Lee.
> 
> 
> On 2004.07.29 16:40 Lyle Giese wrote:
> > Don't use a browser.  Use an ftp client and I connected just fine to
> > ftp.opencall.org anonymously.
> > 
> > Lyle
> > 
> > ----- Original Message -----
> > From: "Vladyslav" <vladk at azhelp.net>
> > To: "Asterisk-users" <asterisk-users at lists.digium.com>
> > Sent: Thursday, July 29, 2004 11:28 AM
> > Subject: Re: [Asterisk-Users] faxing
> > 
> > 
> > > What's wrong with
> > > ftp://ftp.opencall.org/pub/
> > >
> > > It says "Can't open data connection"
> > >
> > >
> > > On Thu, 2004-07-29 at 17:44, Steve Underwood wrote:
> > > > matthew at txlink.net wrote:
> > > >
> > > > >What are your experiences with faxing through Asterisk to the
> > PSTN?
> > > > >
> > > > >We are using g.711u as a codec, and are originating/terminating
> > with
> > Broadvox as
> > > > >well as through our own PSTN gateways.
> > > > >
> > > > >We have had some luck with incoming faxes coming into our network
> > from
> > Broadvox
> > > > >DIDs.  They work 50% of the time.  Not sure yet on PSTN incoming
> > since
> > nobody
> > > > >that is using FAX is in our local rate centers.
> > > > >
> > > > >Outgoing has been bad.  It seems to work the best if the Sipura
> > user
> > agents have
> > > > >echo cancelation off, but we have to have echo cancelation on our
> > outbound
> > > > >gateways or there is echo in the voice path.  Faxing outbound
> > works
> > very
> > > > >rarely, and if it does, it usually can only send a page or two
> > before
> > we get
> > > > >the infamous "Poor line condition".
> > > > >
> > > > >Does anyone have a suitable FAX setup working?
> > > > >
> > > >
> > > > Using G.711 u or A may work, but don't count on it. Take a look at
> > > > http://www.opencall.org/faq
> > > >
> > > > Regards,
> > > > Steve
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > --
> > > Best regards
> > > Vlad
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 




More information about the asterisk-users mailing list