[Asterisk-Users] TE405P and E1

[Jefrey Ong]

I would suggest you 2 thing.

1) Make sure the CAT5 cable connected from your balun to your TE405P is a
straight cable.
2) If still cannot, try switching the 2 coaxial cables of your balun because
it do make a different because one is for RX and one is for TX.
3) If still cannot, remove crc4

my 2cents,
Jef.

----- Original Message ----- 
From: "Kim Esben Jørgensen" <kej at galnet.as>
To: <asterisk-users at lists.digium.com>
Sent: Monday, July 26, 2004 5:40 PM
Subject: [Asterisk-Users] TE405P and E1


> Hello
>
> Im from Denmark and i've just got my Digium TE405P. But i have some
> problems when i connect it to my E1 connection (ISDN30).
> My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a
> serial to rj45) and a 75ohm coax connection.
> I've tried to connect using the 120ohm with rj45 and a ordinary utp cable.
> But it dosent seem to work. I've tried several zaptel.conf setting, but
> none of them made the led stop blinking.
>
> <my current zaptel.conf>
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-15
> dchan=16
> bchan=17-31
> loadzone=us
> defaultzone=us
> </my current zaptel.conf>
>
> Do you have any hints.
>
> regards
> Kim Esben Joergensen
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>