[Asterisk-Users] bri-stuff NT mode

Mon Jul 26 03:24:14 MST 2004

Hi,

modes= is a bitmap, 1 means NT mode, 0 means TE mode.
So if you have 2 cards and the second should be NT then
use: insmod zaphfc.o modes=2
if both are in NT mode then use: insmod zaphfc.o modes=3.

best regards

Klaus
-- 
Klaus-Peter Junghanns

CEO, CTO
Junghanns.NET GmbH
Breite Strasse 13a - 12167 Berlin - Germany
fon: (de) +49 30 79705390
fon: (uk) +44 870 1244692
fax: (de) +49 30 79705391
iaxtel: 1-700-157-8753
http://www.Junghanns.NET/asterisk/

Am Mo, 2004-07-26 um 10.16 schrieb Petr Grussmann:
> If I use 2 card and need NT mode on both 1card is in NT mode and second 
> in TE mode
> 
> 
> after change zaphfc.c is change both to NT mode but not recognized 
> parameter modes=1 or modes=0
> 
> 
> sorry but I not know good C languages for better change -)
> need parameters for change if I have  more card in Linux  box
> 
> 
> Best regards,
> Petr Grussmann
> Opavanet a.s.
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users