[Asterisk-Users] TE405P and E1

[Steve Hanselman]

Our ISDN 30 is delivered that way, but we were also supplied with a balun
that takes the two balanced coaxs and turns them into a single RJ45, maybe
your telco needs to supply you with some extra kit?

Steve


-----Original Message-----
From: Kim Esben Jørgensen [mailto:kej at galnet.as] 
Sent: 26 July 2004 10:40
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] TE405P and E1

Hello

Im from Denmark and i've just got my Digium TE405P. But i have some
problems when i connect it to my E1 connection (ISDN30).
My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a
serial to rj45) and a 75ohm coax connection.
I've tried to connect using the 120ohm with rj45 and a ordinary utp cable.
But it dosent seem to work. I've tried several zaptel.conf setting, but
none of them made the led stop blinking.

<my current zaptel.conf>
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
loadzone=us
defaultzone=us
</my current zaptel.conf>

Do you have any hints.

regards
Kim Esben Joergensen
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk