[Asterisk-Users] Robbed Bit T1 Configuration

[Paul Egger]

Is it possible to control the dialing format used when making a call from
asterisk separately from the inbound format?  In my case I have a single
robbed-bit T1 configured for featd (to receive ANI and DNIS) on a TE410P.
This configuration works fine for inbound calls, however when an outbound
call is made on this same T1 asterisk dials outbound in the featd format.  I
need asterisk to only dial the phone number in the dial string (no more, no
less), but as I said before asterisk dials out in the featd format, adding
extra digits.  If I configure the circuit for E&M the outbound calls work
fine, but then I cannot receive the ANI and DNIS on the inbound calls.  I
need to make both inbound and outbound calls on the same T1 is this a
possibility?  Has anyone had this issue or can possibly point me I the right
direction?  Any help would be greatly appreciated.

 

Thanks,

 

Paul

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040723/dbda90ff/attachment.htm