[Asterisk-Users] Installing X100P

[Wiley E. Siler]

When I run make I get all kinds of errors.  So far I ahve yet to get
past that problem and when I look for /etc/zaptel.conf and
/etc/asterisk/zaptel.com these fiels do not exist.
 
W
 

  _____  

From: Celedonio Albarran [mailto:cele at advanceinternet.net] 
Sent: Tuesday, July 20, 2004 12:57 PM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Installing X100P



Compile zaptel

 

Edit /etc/zaptel.conf and /etc/asterisk/zaptel.conf

 

modprobe zaptel

modprobe wcfxo

ztcfg

 

start asterisk

  _____  

From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Wiley E.
Siler
Sent: Tuesday, July 20, 2004 1:55 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Installing X100P

 

I attempted to install an X100P card but it was not correctly recognized
by my Redhat 9 install.  I had a test install running without any cards
which was working great minus the outward dialing since no cards
existed.  Now that I have a card, I want to add it to the system.  Do I
have to scratch the whole current install in order to get the X100P
running on my system or is there a way to get it installed as is?  I
really do not want to change my version of Asterisk since it is running
well at this point.  Is it possible to just update and add the card?

 

Thanks,

Wiley

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040720/cc2bfc9b/attachment.htm