[Asterisk-Users] Re: Re: quadbri NT_mode S-Bus Problem

[Brian K. West]

I'm currently looking for a good solid solution that works here in the US
with BRI-U NI-1 off a DMS100 or 5ESS.

bkw

----- Original Message ----- 
From: "Ben Bosshardt" <101610.1720 at compuserve.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, July 19, 2004 11:18 PM
Subject: [Asterisk-Users] Re: Re: quadbri NT_mode S-Bus Problem


> >Are you using Santis Siemens ISDN NT1 ? If yes , we have the same from
> >Siemens Switzerland , What I've done is to get one cable from ISDN NT
> >-- > ISDN MODEM in * Machine ( HFC - S Modem Euro 30 - 40 ) and then
> >used bristuff ( google for it ) , and used that , it just works! . I
> >can send you my configs if you need som ehlp
>
> I gladly look at your config files to see what I have done wrong. At the
> moment the setup is hooked up that I can make inbound and outbound calls
> (from ISDN and SIP clients), just with the limitations as below :
>
> 1. On outbound calls, I get the normal rining call progress tone althought
> the the other party has not even been reached. This then changes from
normal
> ringing suddenly to busy when the other party is sending a busy signal.
I'd
> rather have the call progress send a busy signal right away.
>
> 2. Internal calls between two ISDN client phones on the S-bus is not
> possible. The phone rings but the call is dropped as soon as it is
answered.
>
> Kind Regards,
> Ben
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>