[Asterisk-Users] Polycom IP 500 Voicemail

[Wiley E. Siler]

And it is throughly convoluted in the admin guide.  What is the T for?
Pipe obviously separates entries.  X = any digit one would assume? I am
just luooking for a brief explanation.  Thanks.

Here is the excerpt from the manual.

Attribute 			
dialplan.digitmap 

Permitted Values
string compatible with
the digit map feature
of MGCP described in
2.1.5 of RFC 3435.
String is limited to 512
bytes and 20 segments;
a comma is
also allowed; when
reached in the digit
map, a comma will
turn dial tone back on.
[2-9]11|0T|
011xxx.T|
[0-1][2-
9]xxxxxxxxx|
[2-9]xxxxxxxxx|
[2-9]xxxT

Default Interpretation
When this attribute is
present, number-only
dialing during the setup
phase of new calls will
be compared against the
patterns therein and if a
match is found, the call
will be initiated automatically
eliminating the
need to press Send.
Attribute
Permitted
Values Default Interpretation 

-----Original Message-----
From: Eric Wieling [mailto:eric at fnords.org] 
Sent: Monday, July 19, 2004 11:50 AM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Polycom IP 500 Voicemail

On Mon, 2004-07-19 at 12:42, Wiley E. Siler wrote:
> Thank you!
> 
> Can you tell me more about the dial plan feature?   How do you setup
the
> correct digitmap?

It is all in the Admin Guide you can download from the Polycom web site.

-- 
          Eric Wieling * BTEL Consulting * 504-899-1387 x2111 "In a
related story, the IRS has recently ruled that the cost of Windows
upgrades can NOT be deducted as a gambling loss."

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users