[Asterisk-Users] Numbering Plan and Siemens EWSD

[Bruno Fontana]

I'm using * connected to a EWSD too through an older zaptel (card T400P) 
and there is no problem with PRI calls.
Did you put euroisdn?

asterisk at geek.be wrote:
> Hi all,
> 
> We're trying to hook up our Asterisk config (Card: TE410P) with a
> Siemens EWSD switch. The link is ok on both ends (green), with no errors.
> 
> The problem is when we try to make a call from our side (via call
> files), we get the pri/E1 error 
>    Ext: 1  Cause: Temporary failure (41), class = Network Congestion (2)
> 
> Our Telecom partner (they checked with Siemens) mentioned that we need
> to configure a dialplan as 
> 
> "    XXXX numbering plan (Rec. E.164)
> The XXXX stands for ISDN (Telephony), ISDN (Speech), etc"
> 
> This is what they told us, but the closest we can configure in Asterisk
> is the pridialplan (unknown, private, local, national, international).
> 
> We tried all of them, with no difference.
> We also tried them with callerid set, no advance.
> 
> 
> Anyone familiar with this other dialplan, or with the integration of 
> Asterisk/E1 with a Siemens EWSD switch.
> 
> 
> pri debug log of the call below (this was with pridialplan set to 'unknown')
> and without callerid.
> 
> -- Making new call for cr 32780
> 
>>Protocol Discriminator: Q.931 (8)  len=32
>>Call Ref: len= 2 (reference 12/0xC) (Originator)
>>Message type: SETUP (5)
>>Bearer Capability (len= 3) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
>>                             Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
>>                             Ext: 1  User information layer 1: A-Law (35)
>>Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan:
> 
> 0
> 
>>                       ChanSel: Reserved
>>                      Ext: 1  Coding: 0   Number Specified   Channel Type: 3
>>                      Ext: 1  Channel: 1 ]
>>Calling Number (len= 4) [ Ext: 0  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0)
>>                          Presentation: Unknown (67) '' ]
>>Called Number (len=12) [ Ext: 1  TON: Unknown Number Type (0)  NPI: Unknown Number Plan (0) 'xxxxxxxxx' ]
>>Sending Complete (len= 0)
> 
> < Protocol Discriminator: Q.931 (8)  len=10
> < Call Ref: len= 2 (reference 32780/0x800C) (Terminator)
> < Message type: CALL PROCEEDING (2)
> < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan:
> 0
> <                        ChanSel: Reserved
> <                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
> <                       Ext: 1  Channel: 1 ]
> -- Processing IE 24 (Channel Identification)
> < Protocol Discriminator: Q.931 (8)  len=9
> < Call Ref: len= 2 (reference 32780/0x800C) (Terminator)
> < Message type: DISCONNECT (69)
> < Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Public network serving the local user (2)
> <                  Ext: 1  Cause: Temporary failure (41), class = Network Congestion (2) ]
> -- Processing IE 8 (Cause)
>    -- Channel 1, span 1 got hangup
>       > Channel Zap/1-1 was never answered.
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request
> 
>>Protocol Discriminator: Q.931 (8)  len=9
>>Call Ref: len= 2 (reference 12/0xC) (Originator)
>>Message type: RELEASE (77)
>>Cause (len= 2) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>>                 Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
> 
>    -- Hungup 'Zap/1-1'
> < Protocol Discriminator: Q.931 (8)  len=5
> < Call Ref: len= 2 (reference 32780/0x800C) (Terminator)
> < Message type: RELEASE COMPLETE (90)
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users